agFM v1.70 available plus eBook #4 updated rev. 1.20

 I have now updated agFM to v1.70. It is available from the Alternate Downloads sites and should also be live if you run the \e2b\Update agFM\Download and update agFM_v2.cmd script. 

The PDF eBook #4 for agFM has also been updated to rev. 1.20 to match agFM v1.70 (contents list below). Later revisions of all E2B eBooks can be downloaded for free using the original download link that you received in the email when you first purchased it from Payhip.

agFM v1.70 2021-02-14

• Recognise the .binacpi file extension (e.g. to run DSDT.bin files).
• Add Enable\Disable Kaspersky shim EFI menu entry.
• rEFInd EFI booloader/manager by Rod Smith added (EFI boot manager) added.
• SAMPLE startup menu files now include new entries to run rEFInd.

The latest Beta version of Easy2Boot is v2.08e. The Beta history for v2.08e is:

2.08a - add \_ISO\MAINMENU\DisableKasperskyShim.mnu
2.08b - bugfix in Make_E2B_USB_Drive.cmd drive creation script due to XP Home not having tasklist.exe
2.08c and d - bugfix for Win7 Repair option (did not swap hd0 with hd1), did not wait 3 secs on wimboot prompt on Dell PC - thanks to Jose C for reporting the issue
2.08e - improve Trad Chinese language file, E2B ignores .lua files, Test_file_access_speed.lua added to UTILITIES folder for agFM menu system (test file access speeds under agFM)

and I suggest you also update your E2B files to this latest version too as it adds new features and bugfixes.

eBook #4: UEFI multi-boot using the a1ive grub2 File Manager

Contents:

How to fix intermittent errors when booting from a USB drive

Around 1998 we got introduced to USB 1.0. The pure data bit rate could reach an amazing 12Mbits/s (approx 1MByte/s in real life). Then we got USB 2 at the start of the new Millenium which gave us up to 60MBytes/s (much faster than slow-spinning CDs!). 

Later still (after 2008) we got USB 3, 3.1 and 3.2 with up to 2.4GBytes/s and very recently we have USB 4 (based on Thunderbolt 3) and are promised speeds of up to a staggering 40GBytes/s.

The names which were given to these different technologies (and seem have been randomly assigned with little forethought) are:

• USB 1 - Low Speed
• USB 1 - Full Speed
• USB 2 - High Speed
• USB 3 - Super Speed
• USB 3.1 Gen 1 Super Speed
• USB 3.1 Gen 2 Super Speed+
• USB 3.2 Gen 1x1
• USB 3.2 Gen 2x1
• USB 3.2 Gen 2x2
• USB 4 Gen 2x2
• USB 4 Gen 3x2 - USB4 routing for tunnelling of USB3.x, DisplayPort 1.4a and PCI Express traffic and host-to-host transfers, based on the Thunderbolt 3 protocol

So what started out as 1MB/s wired protocol has ended up as having a 40+GB/s Input/Output transfer protocol zipping along at radio frequencies!

Now when considering booting from a PC or Notebook, the BIOS/Firmware driver is responsible for USB I/O communication. Most computers which have USB 3 ports, have both USB 3 and USB 2 drivers embedded in the firmware. However, these BIOS drivers will probably not be fully featured like full-blown Windows or Linux drivers. Hence, they may not fully implement the Super Speed protocols and error handling may be limited.

The transfer protocols used by the driver will determine how fast I/O access is and thus how fast we can boot from the USB drive. Moving large blocks of data using a high-speed USB block-transfer protocol under Windows can give us those high speeds, but the BIOS firmware is probably using a more primitive and slower protocol to access the USB drive.

Another point to keep in mind is what BIOS code is used. If we Legacy\MBR-boot from the USB drive it will use the real-mode IBM-compatible BIOS USB driver, but if we UEFI-boot then a completely different UEFI USB driver will be used by the BIOS.

Because the BIOS\Firmware knows what USB chipset is present, it is possible for the BIOS developers to make sure that the USB speeds are optimized. However, most BIOS developers just use generic USB 2/3 drivers to add into their Firmware whilst others may spend some time and effort tweaking the USB BIOS code (e.g. Apple).

Gotcha's

11 useful Antivirus ISOs all in one downloads

 In a fairly recent article, Jayro (the developer of Medicat) has provided a separate 7GB .zip file download of useful antivirus ISOs.

You can extract the contents to a Ventoy USB drive or to the root of an E2B USB drive (except for the two autorun files).

If you don't want to use Ventoy (because it will overwrite the \ventoy\ventoy.json file) then just copy the ISO files to the \_ISO\ANTIVIRUS folder.

Note that some of the ISOs do not support UEFI (Avast, Sophos,AVG and Comodo do not even contain EFI boot files). Jayro has disabled UEFI boot in the Ventoy configuration file because many of the others are problematic when attempting to UEFI-boot from them. Only DrWeb, Eset and MalwareBytes seem to UEFI64 boot using agFM.

Updated:

~ I actually downgraded the 2018 Malwarebytes Bootable WinPE to a 2016 version for added stability, it boots up WAY faster, uses much less RAM, and has a smaller file size. Has a startup sound with audio instructions to get you started. This older version is only temporary, until I have the time to build a proper one that's more up to date.

~ Minimum memory requirements have been reduced at the bottom of this changelog, to better reflect the memory needs of the included WinPE WIM files. Minimum RAM requirements below has dropped from 3GB down to 2GB, but you'll still want 4GB or more for comfortable usage. Luckily most modern PCs and laptops come with no less than 4GB these days.

~ Malwarebytes virus definitions to v2020.12.08.03

Add Medicat v21.01 to your E2B USB drive

 Medicat 21.01 is in the form of zip files for use with 7Zip and Ventoy. You are supposed to extract the contents to the first partition of a previously-made Ventoy USB disk. Instead, you can just copy all the files (except \autorun.inf and \autorun.ico) to the root of your E2B first NTFS partition and only use Ventoy to boot to Medicat. This will add lots of folders to the root however and you may overwrite the contents of your \ventoy folder which will affect your existing Ventoy theme and menu settings (if you have any).

See also: https://rmprepusb.blogspot.com/2022/01/quickly-add-medicat-2112-to-easy2boot.html

Remember to disable your AntiVirus first (and check that it does not 'quarantine' any files on the USB drive once you have completed the copy and re-enabled your AV).

Medicat v21.01 zip file contents

Then simply boot to Ventoy from the E2B USB drive.

Note that copying the Medicat files will also add the \ventoy folder to the first E2B NTFS partition which includes a ventoy.json file. This will change the Ventoy theme and also change the menu entry names. You may find it educational to look at the ventoy.json to see what it does because a few ISO mey require special settings.

I found that quite a few of the menu entries had problems UEFI-booting on my Lenovo IdeaPad - maybe you will have better luck...

The alternative would be to selectively pick only the ISO or WIM files that you want, and add them into the existing E2B menu folders. This means you don't need to boot to Ventoy.

In most cases you do not need to add any of the other files (some may require the ventoy.json if anything 'special' needs to be done to run the ISO using Ventoy - so you may need that too).

Medicat Mini Windows

To add the Medicat WinPE, we need the file:

\Boot_an_Operating_System\[UEFI]_Mini_Windows_10.iso

Copy the ISO file to the \_ISO\WINPE folder (for instance). 

You will also need to copy the following files and folders to the root of the E2B NTFS partition #1 as they are required by Medicat Mini Windows 10 too (the Mini_Windows_10.iso only contains boot files and the boot.wim file):

\Start.exe

\CdUsb.Y

\autorun.cmd (optional)

\PortableApps

\Programs

\System (optional)

To save a key press or two in the E2B and agFM menus, you can rename the extension to _.isodef.iso.

Issues?

• AntiVirus - MalwareBytes: UEFI64 does not seem to boot using Ventoy. Boots OK using agFM menu system and choosing .isowin or .isomap options however.
• Some other Windows ISOs also seem to have problems. Try .isomap option in agFM.
• Ventoy has problems with some payloads if testing using VirtualBox+VMUB but on a real system it usually works OK.
• If you have intermittent problems when booting large ISOs, etc. then try a USB 2 port or connect a USB 2 extension cable to the E2B USB drive so that only USB 2 speeds are used instead of USB 3 speeds.
• If you are using a USB 3 SSD device and experience problems, try using a USB Flash drive or USB spinning Hard Drive instead - I have seen some issues when booting some Linux distros (e.g. Slax) from a USB SSD (the USB drive is not detected by the kernel and  fdisk -l does not list the USB drive)!
• To boot using agFM, you may require > 4GB of RAM in the system.

Recommended for E2B: SanDisk Extreme Pro 3.1 (#ad)

Latest Windows update KB4535680 blocks agFM Secure Boot!

You can Secure UEFI64-boot to agFM on the E2B USB drive because it uses the Kaspersky bootx64.efi signed grub2 shim file. This boot file originated from Kaspersky and was signed by Microsoft as being 'Secure'. However, it contained a loophole which allowed us (via some clever programming) to load unsigned modules and hence an unsigned version of grub2 (e.g. grubfm or agFM or Ventoy, etc.).

A year or so ago, Microsoft released a KB Update which added a 'blacklist' entry into the UEFI BIOS non-volatile RAM of the Windows system UEFI firmware. This is called the DBx (or dbx) list and it can usually be found in your UEFI BIOS settings.

The DBx list was specifically intended for this purpose - to blacklist boot files which Microsoft had signed as 'Secure' but later turn out to be not as 'secure' as they thought!

The update provided by Microsoft immediately caused a lot of issues on certain Secure Boot OEM systems which also used this same EFI boot file (Lenovo?, HP?) and thus the update prevented them from booting after it was installed! Microsoft quickly withdrew the Windows Update and left their victims to try to rescue their secure but unbootable systems.

Now it seems Microsoft have tried again (KB4535680 2021-01-12) but the new Windows update is only applied to certain systems (and probably only those that boot via UEFI and have GPT partitions on the boot disk):

Add rEFInd to agFM

Clover identifies EFI files on all partitions.
You can also add your own menu entries if you wish.

If you want to add rEFInd to your Easy2Boot USB drive, then you can download the current rEFInd files to the \EFI\refind folder, rename the bootx64 and bootia32 .efi files and then simply add all the files to the 2nd FAT32 partition (agFM partition) of your E2B USB drive.

You can configure the rEFInd menu by editing the \EFI\refind\refind.conf text file.

Instructions

agFM 1.70b Beta and E2B v2.08a Beta available (BUGFIX for Blank screen on UEFI booting)

It has been reported that some notebooks such as the Lenovo IdeaPad S145 and ZYREX SKY 232 do not like the UEFI64 Kaspersky .EFI boot shim which agFM uses by default.

The Kasperksy .EFI boot file is signed by Microsoft and allows us to boot to agFM which then temporarily disables Secure Boot, thus allowing us to run agFM grub2 and boot from both signed and unsigned (insecure) ISOs and other boot files.

However, some systems will not UEFI64 boot to the Kaspersky+agFM boot files (even if Secure Boot is disabled in the BIOS). The reason for this is unknown.

Another problem with the Kaspersky shim is that it may be blacklisted by a Linux or Windows update which can add an entry into the BIOS's DBx blacklist EEPROM firmware list. This means that if Secure Boot is enabled in your BIOS on your system, it will not allow the Kaspersky EFI boot file to load and you may see some sort of 'Security Violation' error from the BIOS on boot. You can check your BIOS DBx list to see if has any entries (and clear the list).

The solution to both these issues is to remove the Kaspersky shim and this process is documented on this page in the Troubleshooting sections and in the FAQ page.

In these latest Beta versions, I have modified the E2B and agFM menu system so that you can enable or disable the Kaspersky shim by using a menu entry. If you remove the Kaspersky Secure Boot EFI file, you will not have the ability to secure boot to the agFM menu.

Update Instructions

agFM v1.70aBeta available

The latest agFM v1.70aBeta version now understands files with the new .binacpi file extension.

If you have a binary acpi file which you want to patch your BIOS with (for instance to try to get ACPI support working under XP using a DSDT.bin file), you can change the extension of your file from .bin to .binacpi.

It will then by listed in the agFM menu system and agFM will present you with this menu when the .binacpi file is selected:

E2B v2.07 is now released

 The latest version 2.07 is now live.

1. \E2B Launcher.exe application added

2. Add .ventoyignore dummy files to \_ISO\docs and \_ISO\e2b folders for faster Ventoy startup

Why not treat yourself?

Having problems booting UEFI payloads with E2B, Rufus, Ventoy, etc.?

Maybe you didn't get the present you really wanted at Xmas or you are just feeling depressed at having to stay indoors during Covid Lockdown? Then why not treat yourself to an IODD Mini SSD  CD\DVD emulator (#ad).

This small device fits easily into any pocket and being SSD-based it is robust, light and fast.

In case you didn't get the memo - the Mini can not only load any ISO as a virtual DVD drive, but it can load up to FOUR different VHDs at the same time! That means you can have any four USB disks you like. Each disk can contain multiple partitions, so you can have four different complete OS's on those disks and boot to any of them (not counting the SSD disk itself). You can also set each Virtual disk to be a Removable USB device and thus emulate a USB Flash drive instead of a USB HDD (or up to four USB flash drives).

If you copy on an empty file with a .VHD extension (or any file) and select it - you now have a blank 'disk' which you can install anything you like onto (after partitioning it and formatting it like any other blank disk).

Do you have many small bootable USB drives, each with a different payload? Then why not just convert each one to a .VHD file (e.g. using RMPrepUSB - Disk to File) and store them on the IODD?

Note: VHD files are  just disk images. The file needs to be contiguous.

Of course, it can't do fancy stuff like auto-install Windows, apps, drivers and updates using user XML files like E2B can with SDI_CHOCO, it can't attach a persistence file to an ISO and boot the live ISO with persistence, it can't Secure-boot boot non-secure ISOs, it can't run ISOs that were actually designed to be extracted onto a flash drive rather than boot as a liveCD, it doesn't contain PassPass or UtilMan XML files to bypass Windows account logins and all the other good stuff that E2B+agFM+Ventoy can do - BUT the good news is you can simply add E2B+agFM+Ventoy onto it!

Prices are around $130 for the 256GB version. You know you deserve it :-)

agFM v1.69 and 'Ventoy for Easy2Boot' v1.0.32 released

 agFM v1.69 and 'Ventoy for Easy2Boot' v1.0.32 are now released and will be automatically downloaded when you make a new E2B USB drive or run the appropriate \e2b\Update agFM cmd files to update agFM and Ventoy.

eBook #4 for agFM has been revised and updated for the new F1 and F5 menu structure in agFM. Updates are free - just use the link in the original email receipt from Payhip.

E2B v2.07 will be released soon - the only changes to E2B are the new E2B Launcher utility and the addition of some .ignoreVentoy dummy files to speed up booting to the Ventoy menu.

Please donate!

If you use E2B+agFM+Ventoy, please donate something to a1ive and LongPanda who are the developers of grubfm and Ventoy. They deserve at least a cup of coffee for all their excellent hard work which they provide for free! Think where we would be if we didn't have these utilities to use on modern UEFI systems!

'Ventoy for Easy2Boot' v1.0.32 with UEFI32 support now available

 Ventoy now supports UEFI32 (experimental) as well as UEFI64.

I have compiled a version for Easy2Boot from the v1.0.32 Ventoy sources.

To update your E2B USB drive...

'Ventoy for Easy2Boot' v1.0.31 is now available

 Download ZIP file and drag-and-drop onto \e2b\Update agFM\Add_Ventoy.cmd to update.

The download is in the latest Betas folder on Alternate Downloads site.

https://1drv.ms/u/s!AqlrQcdsFA-K7S2G6_UPKR7HCecH?e=dhknNv

I will release in a few days unless someone reports a problem.

This is NOT the official version of Ventoy - it is modified - so do not report any problems to the Ventoy author!

Ventoy UEFI32 is not supported.

Don't forget to subscribe for the latest news and tips!

a1ive grub2 code to check for an expiry date

 If you have added your own \boot\grubfm\startup_menu.txt file, you can check for an expiry date. This would force the user to update their USB drive. Here is an example of how to test dates.

Check expiry date

You can add the lines below to check that an expiry date has not been met or exceeded. Change the value of LOWERDATE  and UPPERDATE as required to set a valid range.

The code gets the current date in YYYYMMDD format into sdate. The regexp command is used to get the first 8 characters only.

It then compares that dates and reboots the system if the expiry date has been met or if the date is before or equal to the LOWERDATE. The LOWERDATE test helps to prevent the user from cheating by setting the RTC (Real Time Clock) to an earlier date.

This may be of use if you want to force the user to update the USB boot drive after a specific date (.e.g. example = expires Feb 01 - valid for any day in January).

# check date - reset if UPPERDATE (YYYYMMDD) is equal to or smaller than current date
set LOWERDATE=20201231
set UPPERDATE=20210201
unset now;date -s now;regexp -s sdate '(........)' "$now"
# display RTC date and time in human form (optional)
date -m
if [ "${sdate}" -le "${LOWERDATE}" ]; then echo "ERROR: INCORRECT RTC DATE - rebooting..."; sleep 5; reset -w; fi
if [ "${sdate}" -ge "${UPPERDATE}" ]; then echo "ERROR: THIS SOFTWARE HAS EXPIRED ($sdate >= $UPPERDATE) - rebooting..."; sleep 5; reset -w; fi 

unset now;unset UPPERDATE;unset sdate;unset LOWERDATE

Taken from E2B eBook #4 - UEFI-multiboot using the a1ive grub2 File Manager

agFM v1.69b Beta and E2B v2.07g available

E2B has a slightly revised version of the new Launcher Windows app.

agFM uses the latest version of grubfm (last one for this year). I have now added the F1-F6, F10 and Ctrl+F menu icons into the default grubfm menu theme too.

Has anyone tried the new Launcher app? Please provide feedback...

Happy New Year to all - and let's hope 2021 is better than 2020!

Download from the Alternate Downloads areas as usual (see side panel for links).

agFM v1.69a Beta available

 a1ive has improved the menu system and the F1 button can now display hardware information under grub2.

You can also boot to Ventoy and AIOBoot and PXE boot if you have them present on the USB drive.

Unfortunately, if you have added a your own grub2 theme to the agFM partition, you will have to modify it so that it works correctly with the new grubfm\agFM version. Details of how to modify an existing theme are included in the latest version of eBook #4 v1.19Beta which has been updated for agFM v1.69. You can get the updated version for free by using the link that was emailed to you when you first purchased it.

The E2B eBook 4 covers how to add different themes and configure your own startup menu (updated specifically for agFM v1.69 and later only).

I have also updated five different agFM themes which should work with the new agFM v1.69 - see here.

The new agFM v1.69a Beta can be found here.

Note that 'Ventoy for Easy2Boot' has not been updated and is still v1.0.29. I do not intend to update this version for a while.

A few of the modified themes are shown below:

seven22 theme (22 menu entries per screen)

Tela theme

You can modify the theme.txt and fm.txt files to adjust the menu as required.

Does Windows 10 20H2 chkdsk now cause BSODs?

 Just a heads up...

Under some (as yet unknown) conditions, running chkdsk c: /f may damage your Windows filesytem and cause BSODs! See here for a report for Windows 10 20H2 update KB4592438.

The 'bug' is unconfirmed by Microsoft.

Easy2Boot v2.07b Beta available

This version has a new  version of  the  'E2B Launcher.exe' 32-bit Windows application which you can find in the \_ISO\docs\E2B Utilities\Launcher folder.

I have also added a 'Desktop E2B Launcher.cmd' file into the folder. You can copy this file to your Windows Desktop so that you can quickly run E2B Launcher from any E2B USB drive that is connected to your system. Each E2B USB drive must contain the new Launcher folder or else it won't be detected.

2.07c adds an extra link in the 'Tools' tab which copies the 'Desktop E2B Launcher.cmd' file to the Desktop for you.

Easy2Boot v2.07a Beta available

 This version has a new  Beta version of  an 'E2B Launcher.exe' 32-bit Windows application which you can find in the \_ISO\docs\E2B Utilities\Launcher folder.

Download from the Latest Betas folder here.

agFM v1.68 released (Legacy boot of Linux ISOs bugfix)

 Version 1.66 and 1.67 had a bug when booting Legacy Linux and other non-windows ISOs using the .isodef, isomap and .isomem options in agFM. This was due to a1ive changing his code and removing the MAP file from his file structure!  

Use the \e2b\Update agFM batch file to update to the new version.

agFM grub2 code to protect your E2B drive from being cloned

 I was asked today for a grub2 menu which would protect the E2B USB drive from being cloned onto another drive.

The lines below can be added into your startup_menu.txt file.

It checks the total drive capacity of your E2B USB drive - if it is not as expected, then it displays a graphics file (candle in this case) and then prompts you to enter a password (3 chances). If the user does not know the password, then it loads a 'guest' menu, but it could just as easily  shutdown or reboot the PC.

You can display any graphics file you like (.png, .jpg, .bpm) and you can change the messages, etc. as you wish.

eBook #4 v1.17 now available (and agFM v1.67 released)

I have just updated eBook #4. You can get the update for free by using the link in your original Payhip email that you received when you first purchased the eBook.

I also found an old bug in the .isopersist code in agFM, so I have now updated agFM to v1.67 today. The problem was that the *-rw persistence file would only work if it was in the root of the USB drive. Now it can be in either the root or the same folder as the Linux ISO.

Use Ventoy to boot WinPE ISOs such as c't Emergency Windows 2021 ISO (aka 'ctNotWin', 'ctNotFall' etc.)

Easy2Boot and agFM can boot WinPE-based ISOs easily, however many of these ISOs require access to files on the 'DVD' drive once they have booted to WinPE.

Since these files are inside the ISO file on the USB drive, these extra utilities cannot be found by the miniWindows environment and you may find some Desktop and StartMenu items missing!

E2B and agFM can make this work however by using that fact that most WinPE's are built using WinBuilder which typically contain this extra startup code. When a WinPE made by WinBuilder boots, it looks for a volume containing a .ini file in the root (e.g. \WIN10PESE.ini) which specifies the path of an ISO file. WinPE will then find that ISO file and auto-mount it as a virtual DVD drive so that WinPE can now access the files within the ISO.

WIN10PESE.ini

[IsoInfo]
IsoName=/_ISO/MAINMENU/Win10XPE_x64.ISO

E2B and agFM will modify these .ini files before booting the ISO (that is one reason why a write-enabled USB drive is required). The ISO filename should not contain spaces because some versions of WinBuilder cannot cope with spaces in filenames.

However, this only works if the WinPE contains this special WinBuilder startup code which looks for the special WinBuilder .ini file.

E2B and agFM also modify the \AutoUnattend.xml file in the root of the E2B USB drive - this file is automatically run if the ISO is a Windows Install ISO (but it is not usually run by WinPE ISOs).

c't Emergency ISO

Unfortunately, some WinPE ISOs do not contain this special startup code (e.g. c't Emergency Windows 2021). There are a number of ways around this:

agFM v1.66 released

Changes from v1.65 are:

• F3 now also shows winre.wim Boot to Windows Recovery entries if a Recovery folder is present.
• F10 hotkey will reload agFM without rebooting
• Search hotkey is changed from Ctrl+Shift+F which did not work in MBR\Legacy mode to Ctrl+F
• New Ctrl-F search function searches current level and one folder down only. User can search for any extension or use a hotkey. e.g. Ctrl+F P will list all .imgPTN* files in current directory and level below current directory.
• F5 now uses grubfm built-in code (/boot/grubfm/f5.sh no longer used).
• Bugfix for dd command where -c exceeds 63555.
• Ability to use Ctrl+F as menu hotkey (but not all Ctrl+ letters can be used!).
• The menuentry command now supports --help_msg option which can display help text in a themed menu (but is buggy, so I recommend you don't use it in your menus!).
• The e2b.sh and map.sh files now use map -f to map as the first device when in efi mode.
• Add_Ventoy.cmd changed to work with latest e2b for Ventoy 1.0.29.zip download.
• Update_to_latest_Ventoy_version.cmd file will now automatically add 'Ventoy for Easy2Boot' to the USB drive. The current E2B version of 'Ventoy for E2B' will be downloaded from the E2B server.
• Latest grubfm build (2020-12-01).
• /e2b/loadfm file added. 
• /ventoy/Sample Ventoy config files folder added (contains sample files which user can add to ptn1). Copy to \ventoy folder on ptn1 will allow you to boot agFM or E2B from the Ventoy menu
• SAMPLE_slack theme fm.txt updated for Ctrl+F text display on menu.
• SAMPLE_slack theme fm.txt now supports timeout countdown so it can be used for startup menu with F1-F6 icons and timeout counter
• Improved SAMPLE_startup_menu.txt - now can have more than 10 entries and define a different icon and hotkey for each menu entry.

Now when a user runs Make_E2B.exe, they will be asked if they want to add agFM and Ventoy to partition 2. Both will be fetched from the E2B server. Currently Ventoy is the special 'Ventoy for Easy2Boot' v1.0.29 which is not blocked to run on an E2B USB drive.

agFM v1.66Beta12 available (and how to MBR-boot the grubfm.iso from grub2)

agFM Beta12

agFM Beta10 adds a new F10 hotkey function (new hidden feature).

If you press F10 in a grubfm menu, then it will completely reload grub2.

You may find this useful if you run an ISO or some other payload file and grubfm loses the gfxmenu system and just displays a black-and-white text menu. If you then press F10 then the whole agFM boot file will be reloaded thus saving you having to reboot. Since some servers can take 5 minutes to reboot, you might find this useful.

The actual code is compiled within agFM (in global.sh), but if you are interested, you can add a menuentry to your own menu system as shown below:

Latest agFM v1.66 Beta7 available (release candidate)

 Please test latest version 1.66 Beta7 as I hope to make it the new release version in a day or so.

See OneDrive - Latest Betas folder for the download.

Please don't just wait for it to be released before trying it. It is easy to test it by simply extracting the files to the 2nd partition. If you want to go back to the old v1.65 then simply click on \e2b\Update agFM\Download and update agFM_v2.cmd.

Changes from v1.65 are:

Latest agFM v1.66Beta5 available

 Todays version in 'Latest Betas' will automatically download and add 'Ventoy for Easy2boot' when you double-click the \e2b\Update agFM\Update_to_latest_Ventoy_version.cmd file.

The current version is Ventoy v1.0.29 but is slightly modified to run on E2B.

See the Ventoy page on the E2B site for details and a suggested ventoy.json file...

Ptn1: \ventoy\ventoy.json

{

        "control_uefi": [

        { "VTOY_DEFAULT_MENU_MODE": "1" },

        { "VTOY_FILT_DOT_UNDERSCORE_FILE": "0" },

        { "VTOY_DEFAULT_SEARCH_ROOT": "/_ISO" },

        { "VTOY_MENU_TIMEOUT": "5" },

        { "VTOY_DEFAULT_IMAGE": "/_ISO/LINUX/ubuntu-18.10-desktop-amd64.iso" }

    ],

"control_legacy": [

        { "VTOY_DEFAULT_MENU_MODE": "1" },

        { "VTOY_FILT_DOT_UNDERSCORE_FILE": "0" },

        { "VTOY_DEFAULT_SEARCH_ROOT": "/_ISO" },

        { "VTOY_MENU_TIMEOUT": "10" },

        { "VTOY_DEFAULT_IMAGE": "/_ISO/LINUX/linuxmint-20-cinnamon-64bit.iso" }

    ]

}

Black Friday is still on! 25% discount on Kon-Boot, cheap Samsung SSDs and more...

If you often need to gain access to a customers Windows account (local or online account) or MAC OS account but don't know the account password, then Kon-Boot is the quickest and simplest way to gain access (MBR or UEFI).

Today you can get 25% off KonBoot by using this link,

Kon-Boot can now work on larger USB drives as well as small USB Flash drives, so you can install Kon-Boot onto any USB drive and then add E2B to the same drive. More details here.

P.S. Black Friday Samsung 860 500GB SSD #ad on offer at Amazon for 47% off (over 60% off 2TB version!).  If your laptop does not have an SSD hard drive, this will be the best saving you've ever made as you won't have to buy a new laptop for another few years at least! Why not give them as Christmas present and help your family upgrade their own laptops over the Christmas holidays?

Hurry! 128GB SanDisk Extreme Pro (#ad) USB 3 Flash drive for only £30 !!! One of the fastest flash drives you can get - ideal for E2B!

Note: This is the superfast PRO version, not the slow, budget GO version (which is not recommended!).

Check out the SD card discounts too...

Ventoy for Easy2Boot v1.0.29

I have updated the test version of Ventoy v1.0.29 for E2B and also I added the core.img into the .zip file itself.

This now makes it easier to add Ventoy to an E2B USB drive.

Latest Betas are here as usual.

1. Update to latest agFM E2B UEFI File manager v1.66Beta4 (extract contents onto partition 2) (note that there was a bug in Beta3!)
2. Download the latest e2b_ventoy-1.0.29-windows.zip file
3. Drag-and-drop the new e2b_ventoy-1.0.29-windows.zip onto the Ptn2:\e2b\Update agFM\Add_Ventoy.cmd file

The new Add_Ventoy.cmd will automatically update/add Ventoy to partition 2 and add the correct core.img file.

I have also added and updated the compile instructions for Ventoy.

How to patch and recompile Ventoy

I do not intend to continually patch and recompile Ventoy every few days so that it can be added to E2B, however if you want to know how I made my own version, I have written up some notes here.

My knowledge of C is limited and I am not very experienced with Linux, so please correct me if any of the instructions are wrong or maybe inaccurate!

I have also slightly modified the wallpaper in my new version of Ventoy_1.0.29_windows.zip now to make it obvious that it is not the official Ventoy version - can you tell?