Easy2Boot v1.A3 release now available

Due to v1.A2.exe giving false-positives with some AV software and causing users problems, I have decided to release v1.A3 early which I hope will give less trouble!

The changes from v1.A2 are:

• New \grdlr grub4dos 2018-09-19 (no bug fixes, just extra functionality).
• Bugfix QRUN.g4b for .jpg/,bmp wallpaper file extension - if an animation was running then selecting a .bmp or .jpg file did not change the wallpaper.
• Warning added if Windows 7 .imgptn file has the bootx64.efi boot file missing.
• \_ISO\docs\Make_Ext\Make_Ext.exe utility added - allows you to make persistence files without needing RMPrepUSB.
• QRUN now displays contents of the \.disk\info file just before running an ISO (if it exists).
• SWITCH_E2B.exe re-packaged so will not trigger false-positives with AV software and file sync.exe removed.
• Comments changed in Sample .mnu files to add a mention of the Make_Ext.exe utility which is now available as well as RMPrepUSB.

Let me know if this version gives you any problems. I will put it on the main website in a day or two as soon as I get some feedback.

E2B v1.A3b Beta includes new Make_Ext.exe utility

The latest Beta version now includes the new Make_Ext.exe utility which will make linux persistence files on your E2B USB drive for you. This means you do not need to have RMPrepUSB on your PC or the USB drive.

The \_ISO\docs\Make_Ext folder contains the utility + support files.

Note: v1.0.0 had a bug and did not always format the file to ext format (you can tell because it runs very quickly!). Please use v1.1.0 which can be found in E2B v1.A4 and later versions.

The symptom is that if you attempt to mount the ext file, linux will complain about a bad superblock, etc.

How to directly install from Windows Install ISOs using UEFI with E2B

E2B allows you to boot Windows Installers via UEFI. However, you must first convert the Windows Install ISO to a .imgPTN file if you wish to UEFI-boot from it as well as MBR-boot.

This means that you must convert each Windows Install ISO to separate .imgPTN files.

However, there are ways to perform UEFI installs directly from Windows ISOs.

If you first MBR- or UEFI-boot to a Windows PE .imgPTN file and your Windows ISOs are on a second partition, you can use WinNTSetup or Windows Setup.exe to install Windows.

The WinNTSetup process has the advantage that you can boot to either a 32-bit or 64-bit WinPE and install either 32-bit or 64-bit Windows to the target hard disk. The Windows Setup.exe process is simpler, but you must boot to WinPE32 to install 32-bit Windows or WinPE64 to install 64-bit Windows.

Here is an outline of the Windows Setup.exe process:

E2B v1.A3a Beta

Apparently, the new self-extracting Switch_E2B.exe in v1.A2 is triggering false-positives on some AV engines.

I have re-packaged it in 1.A3a Beta and hopefully it will cause less false-positives.

Changes from v1.A2 are:

• New grdlr grub4dos 2018-09-19 (additional function added, no bug fixes)
• Fix QRUN.g4b for .jpg/,bmp wallpaper file extension (if an animation was running on menu then selecting a .bmp or .jpg file did not change wallpaper)
• Warning added if win 7 .imgptn has the bootx64.efi boot file missing
• Repackage Switch_E2B.exe for less false-positives with AV software (same v1.0.18)

Please let me know if this new version of Switch_E2B.exe is any better if you had problems with the v1.A2 E2B version. I will update 1.A2 to 1.A3 if it fixes the false-positive issue.

New MPI Tool Kit 0.085Beta2 available with German language file

I think that this version has all the changes required now, so please try it.

If you make a .\CUSTOM\MyCSM.cfg file with the following contents:

!BAT
set LANG=GERMAN

Then any .imgPTN file that you make should have a German menu.

Example of MyCSM.cfg file set to GERMAN language (based on Sample_MyCSM.cfg file)

I think one line still requires translation though.

http://www.easy2boot.com/configuring-e2b/csm-menu-changes/ has details of how to modify the MyCSM.cfg file further if you wish to change the menu appearance.

See the previous blog for more details.

The CUSTOM folder contains a Sample_MyCSM.cfg to help you.

If you want to make a language file in a different language, please feel free to try adding a new language.

Note that you should not change or add any files under .\csm in the MPI download folder, instead always add  extra files to the .\CUSTOM folder - these will overwrite any other files of the same name and will be added into any new .imgPTN file.

Let me know if you have tested this and any comments too.

Thanks
Steve

MPI Tool Kit v0.085 Beta1 with language support is now available

This is an experimental version for testing.

I have modified the menu.lst file so that the CSM menu will support other languages.

At the moment however only English is available.

You can test it like this:

Beware! Windows Explorer's handling of .zip files is buggy!

Tim contacted me today to make me aware of a problem with Windows 10 Explorer's handling of .zip file extraction.

He told me that he had a problem when using WSUS Offline Update. He downloaded the .zip file onto the \_ISO\WINDOWS\installs\ folder but when he tried to use WSUS, he  found it would not work correctly because Windows Explorer had changed the modification date of all the extracted files.

I checked this out by downloading the WSUS Offline Update download file wsusoffline114.zip and this is what I discovered...

Easy2Boot v1.A2 released

This v1.A2 version fixes a few small bugs in v1.A1 and previous versions.

• Bug fix for SUB_MENU_Maker.cmd adding space to .mnu file and prevents background wallpaper from being loaded for new user-made menu folders. 
• Special characters now should work and a UTF-8 .mnu file is written when using .cmd files (E2B MNU Maker.cmd, E2B SUBMENU Maker.cmd, E2B TXT Maker.cmd, SUB_MENU_Maker.cmd).
• If the MFOLDER value has extra spaces on the end, these will be automatically removed.
• Small tweaks to F1.cfg help files.
• Add DOS menu to FreeDOS disk image so can boot it in different configurations.

E2B v1.A2b Beta available

Two long-standing bugs have been reported in the SubMenu Maker .cmd script.

When the .cmd script is used, to make a .mnu file, it puts a space character at the end of the line, e.g.

set MFOLDER=\_ISO\NEW 

This can cause problems (e.g. when adding a wallpaper file at \_ISO\NEW.jpg).

Also, any special characters, when input by the user (e.g. Ü) are not converted correctly when using the .cmd scripts. I have attempted to fix this by using a code page setting of 65001 just before writing the new .mnu file.

The changed files from v1.A1 are:

• \_ISO\SUB_MENU_Maker.cmd
• \_ISO\docs\E2B Utilities\E2B MNU Maker.cmd
• \_ISO\docs\E2B Utilities\E2B SUBMENU Maker.cmd
• \_ISO\docs\E2B Utilities\E2B TXT Maker.cmd
• \_ISO\e2b\grub\DUTCH\F1.cfg
• \_ISO\e2b\grub\ENG\F1.cfg
• \_ISO\e2b\grub\FRENCH\F1.cfg
• \_ISO\e2b\grub\PORTU_BRAZIL\F1.cfg
• \_ISO\e2b\grub\ROMANIAN\F1.cfg
• \_ISO\e2b\grub\SIMP_CHINESE\F1.cfg
• \_ISO\e2b\grub\TRAD_CHINESE\F1.cfg
• \_ISO\DOS\MNU\FreeDOS288.ima.gz - DOS menu added so some drivers can be skipped

v1.A2b Beta can be downloaded here.

Please try the new .cmd files and let me know if there are any problems with your language or Windows version.

New eBook 'How to install Microsoft Windows using Easy2Boot' is now fully released

My latest eBook, 'How to install Microsoft Windows using Easy2Boot' is now available here (downloadable as a PDF file). This is now the fully released version 1.00.

It mainly covers Window 10 installs but the same techniques can be applied to most post-Vista Windows install scenarios. Note that the installation of Windows XP is not covered in this guide.

There are even a few jokes hidden inside it, just to make sure you are awake!

This new eBook assumes you are already familiar with E2B.

If you also buy my first eBook, 'How to make a multiboot USB drive using Easy2Boot', then you will get a 10% discount on both eBooks :-)

E2B v1.A1 (revised)

I have made a small change to the released version of E2B v1.A1 before I make it live on the E2B website.

It now has a new version of SWITCH_E2B.exe (which you may find useful if you are into dual-partition image sorcery!).

This new version will prompt you to enter a partition type number for the second partition image, if SWITCH_E2B does not recognise the partition type of the second image file.

Previous versions of SWITCH_E2B would have set a type number of 0 (no partition).

This new change means that you can switch in dual images (e.g. HighSierra.imgPTN + HighSierra.) and set the second image to be an ext partition or HFS partition, etc. so it is visible to an OS.

This means that you do not need to boot to the CSM menu first so that the CSM menu code sets the partition type - thus you can use Switch_E2B to switch partitions and then UEFI-boot immediately.

Install Hackintosh High Sierra from an E2B drive

I have managed to get the Hackintosh High Sierra installer working on my E2B drive and successfully installed it onto my Lenovo IdeaPad 300 (at least the Desktop, Enet, kbd and touchpad work)!.

See RMPrepUSB Tutorial 144.

Beware: Here be Dragons!...

Easy2Boot v1.A1 now released

E2B v1.A1 is here.

As usual, I will delay updating the E2B website with this latest version for a few days, so if you find a problem after updating your E2B drive with v1.A1, please let me know ASAP!

Changes from v1.A0 are:

E2B v1.A1k Beta now available

Changes from previous Beta are:

1.A1k Beta

• New grub4dos \grldr
• E2B_Editor.exe bugfix for duplicate keyboard entries in dropdown list
• F8 in Main Menu changed so does not reload grub4dos
• Win10_PromptUser_for_XML_settings.mnu sample menu added
• Small change to SysInfo2.hta
• Small changes to ZZSubMenuAll.mnu
• New Dweb-livedisk-900_2018_persistent.mnu sample menu file

New eBook 'How to install Microsoft Windows using Easy2Boot' now available

For those of you who cannot wait (all two of you!), I have made an early Release Candidate version of my new eBook available here and is currently at the reduced price of $6 (it will probably go up to $7 or maybe $10 soon though ;-).

The current version of the PDF is rev.0.3 but it may be revised in the next week or so to correct any typos, so keep the link that is emailed to you by Payhip so that you can click on it again in a few weeks time to download a newer revision for free.

This new eBook assumes that you are familiar with E2B already or that you have read the previous eBook.

It does not cover XP installs.

It is not yet 'advertised' on the E2B website as I want to get some initial feedback first, if possible.

Hope you find it useful.

E2B grub2 menu system v0.09 Beta released

If you previously tried the E2B grub2 menu system but could not get it to work (e.g. no payload files were listed in the menus), then please try the new Beta9 versions.

You will need to replace the old UEFI_GRUB2_PTN2_Beta8.imgPTNLBAa23 file with the new UEFI_GRUB2_PTN2_Beta9.imgPTNLBAa23 file.

This menu system allows you to UEFI or MBR boot to a grub2 menu and then directly boot to a large selection of (mainly Linux) ISO files.

It may be more suitable for linux users because you do not need to defragment the ISO files.

E2B v1.A1i/j Beta now available

This 1.A1j version now includes revised versions of the two .mnu files:

\_ISO\docs\Sample mnu files\Windows\WIN10_Prompt_for_PCNAME_and_UNAME.mnu
\_ISO\docs\Sample mnu files\Windows\WIN10_Prompt_for_UNAME_auto_serial_COMPNAME.mnu

and also makes use of a new grub4dos batch file farxml.g4b (find-and-replace in XML).

farxml.g4b accepts three input parameters:

E2B v1.A1h Beta now available with new default background

You can download E2B v1.A1h here. It includes the new default background file.

eBook #2 (in PDF format)

The first draft revision of the eBook #2 is entitled 'How to install Microsoft Windows using Easy2Boot' and mainly deals with the various scenarios for installing Windows 10 from E2B.
It goes into some detail about the Windows Setup stages and XML configuration files, as well as how to automate a Windows 10 build. Windows XP is not covered.

The eBook contents are listed below:

Vote for the next default background for E2B v1.A1

It's that time of year when E2B has a default background change.

Here are some candidates:

Quickly build a versatile WinPE ISO file with just a few clicks (AOMEI Windows PE Builder)

By using the AOMEI Windows PE Builder (free), we can quickly build a useful 32-bit or 64-bit WinPE ISO in just a few minutes and with just a few clicks.

Note: I recommend building first the 32-bit ISO because the 64-bit version will not contain WoW64 and so will not be able to run 32-bit applications such as PortableApps (but you can add Desktop shortcuts to 32-bit and 64-bit apps in the \AIO folder using PEStartUp).

Also, because the WinPE has no added extra Windows components, some added portable applications (such as Chrome, Opera and Mozilla, etc.) may not run correctly (e.g. 'couldn't load XPCOM' error). The provided QtWeb browser Desktop link does work however.

Quick Instructions

Bugfix in WinNTSetup v3.9.1

JFX's WinNTSetup.exe Windows utility can be used to install Windows directly from a Windows Install .ISO or .WIM or .ESD file.

You can format existing partitions first using the 'F' button, but if you want to delete\make partitions, you had to run Diskpart manually first.

WinNTSetup does also support command line switches too, so you could use it to automate a Windows install using a diskpart script and then run WiNNTSetup.exe with some command line parameters.

One advantage of using WinNTSetup instead of Windows Setup is that you can install a UEFI-enabled version of Windows from an MBR boot, you can also install a 64-bit UEFI version of Windows onto the target hard disk even if you are booting from a 32-bit MBR system, e.g.

1. Boot to WinPE 32-bit (I use a Windows 10 install ISO on E2B and hit ENTER to run it in 'Repair' mode). You can also boot to WindowsToGo or some other WinPE instead.
2. Press SHIFT+F10 to get a command console window open (after selecting Country\Language)
3. Use Diskpart to wipe\partition the target system
4. Run WinNTSetup (32-bit version) from the E2B USB drive, select any ISO from the E2B drive (from any folder or partition), select the Windows Edition and target disk volumes and then install Windows. You can instruct WinNTSetup to install for UEFI or MBR booting or both (or ask it not to install any bootmgr boot code).

Note: You can also specify an XML file (e.g. SDI_CHOCO XML file) and tweak some Windows settings using WinNTSetup, but note that if you use an XML file, the Edition that is installed (Home, Pro, etc.) is determined by the setting in WinNTSetup and NOT the XML file - so make sure you set the Edition that you want to install in WinNTSetup's 'Edition' drop-down list before you click on the 'Setup' button!

Secret WinNTSetup feature!

Special Offer - X-Way Forensics course for $30

For a 2-week period, Brett Shavers is offering us his X-Way Forensics course for $29.99.

Play the introductory videos (click on the Introduction link on the right-hand side of page for a 2nd video) to learn more.

Note: I have not personally taken the course myself. I am just bringing this special offer to your attention. If you have followed the course yourself, please let us all know what you thought of it.

E2B v1.A1e/f/g Beta with new Windows All-In-One Install menu

This version now allows the user to add a \_ISO\WINDOWS\WINAIO folder which can be used to hold Windows All-In-One Install ISOs and .imgPTN files.

v1.A1g with improved language files + tweaks + Server 2016 hotkey changed from 6 to D. Some .hdr files now removed and MenuWinInstall.hdr added.

As using AIO ISO files can be unpredictable, if you find that they don't work, then you should convert them to .imgPTN files.

Note that the Menu entry and Menu Heading for the new WINAIO folder has been added to each of the STRINGS.txt files.

If you want to change these entries, create a new language folder and change the LANG variable to your new language (e.g.  ENG1).

If you have a translation for the new strings, please send a new STRINGS.txt file to me. The three new strings are:

# New for E2B v1.A1
$$STRhAIO=Windows AIO install
$$STRl0AI=^A Install Windows AIO    [A] (%CIO% present)\nInstall Windows All-in-One
$$STRl1AI=Install Windows AIO\nInstall Windows All-In-One

Please let me know if you spot a bug!

How to set the Computer Serial number as the ComputerName - Take 2!

This method has the advantage that you can check what the auto-generated ComputerName+SerialNumber is going to be before the install is actually started and can then  change it if required.

The Sample .mnu file 'WIN10_Prompt_for_PCNAME_and_UNAME.mnu' will allow the user to specify the UserName and ComputerName before the Windows Install ISO is run. It then copies your XML file to a BLANK.XML file and modifies it to use the new User and Computer Names that you have specified.

This is useful because you don't need to choose an XML file or an ISO file as they are already pre-defined in the .mnu file. You just boot, enter in the UserName and ComputerName that you want, and the rest of the build is fully automated. If you are using SDI_CHOCO, it even adds drivers and applications automatically too.

However, if you want the ComputerName to include the System Serial number (for instance), you would have to carefully type it in manually when prompted (assuming you knew what it was!).

I have now made a new version of this .mnu file so that it will automatically modify the XML file's ComputerName field with the System Serial number (e.g. PC-1234546) for you! It works in a very similar way to the WIN10_Prompt_for_PCNAME_and_UNAME.mnu, but two boots are required.

Tip: If you run \_ISO\docs\SysInfo\sysinfo2.hta from the E2B drive under Windows, it will list the DMI values held in the Mainboard of the system.

It works in 2 stages like this:

Changing the Windows ComputerName after installation (e.g. to contain the system Serial Number)

It is often the case that the System Admin wants the Windows ComputerName to reflect some aspect of the system itself, such as the system serial number or DELL Service Tag (7,10 or 11 characters) or perhaps the MAC address of the Ethernet adapter.

The main problem is that the Serial Number of the target system cannot be determined until after Setup (WinPE) has booted.

I wanted to try to alter the ComputerName during an automated SDI_CHOCO install using Easy2Boot and a Windows 10 ISO + XML file...

E2B v1.A1d Beta available

Download v1.A1d

Here are changes from v1.A0 (italic font = new changes added since v1.A1c Beta)

• Added 'WARNING: Some types of AV software can cause ChocBox.cmd to run extremely slowly' to chockbox.cmd. 
• Improve Adjust_E2B_Menu.mnu sample menu file - the user can change menu settings, etc. from within a single menu.
• Added \_ISO\docs\Multiple Backgrounds folder - read the ReadMe.txt file and use the ready-made files included. 
• Menu wallpaper files which are automatically used as wallpaper file can now have .jpg file extension as well as .bmp, e.g. \_ISO\WIN10.jpg, \_ISO\DOS.jpg.
• PimpMyDrive.cmd now adds Adjust_E2B_Menu.mnu - some of the other menus are now not added to make the Main menu tidier.
• Sub-menu files \_ISO\xxxx.g4b, .bmp and .jpg are now automatically used if they are present (e.g. \_ISO\ANTIVIRUS.jpg will be automatically used when the AntiVirus menu is loaded)
• SUB_MENU_Maker.cmd file also added to into the \_ISO folder for user convenience (same file as \_ISO\docs\E2B Utilities\E2B SUBMENU Maker.cmd).
• PatchMe script updated to suppress the 'A20 Debug' message on bootup.
• .bat, .xml and .bak files are now ignored if they are in a menu folder.
• .jpg and .bmp files can be placed in menu folders and they will be loaded as background wallpaper when selected by user from the menu.
• .f24 and .uni.gz font files can be placed in menu folders and they will be loaded as new font when selected by user from the menu.
• Few very minor bug fixes.

Make your own E2B 'Launcher' utility

Linasoft's AutoPlay Menu Builder can be used to create your own 'Launcher' executable. You can use an existing template and then make changes to it - perhaps change the language, etc. or add more items.

Although originally intended to create auturun.exe + autorun.inf files for use with CDs that would auto-run when inserted into a computer's CD-ROM drive, it is a useful application to create your own 'Launcher' utility for E2B too (it makes a Windows .exe executable).

Here is a screenshot my current E2B Helper:

E2B eBook progress report

The 'How to make a multiboot USB drive using Easy2Book' eBook has proved far more popular than I ever imagined!

I thought that it might have interested only 10-20 people at most, but since mid-June I have now sold over 100 copies which really surprised me, but it's very nice to know that all my efforts were worth it! The 130pp book took me over 3 weeks from start to finish (sometimes with a 12-hour day and some weeks were 7-day weeks!). After writing the first draft, I carefully followed all the exercises myself to look for any problems in the instructions and I also added screenshots and diagrams. Glen kindly proof-read many drafts and final revisions and since then I have updated and improved the PDF - the latest version is now v2.3.

However, I have had very little feedback on the eBook, so maybe nobody has actually read it yet or they fell asleep trying to read it!

Version 2.3

If you still have the original receipt email from Payhip, you can re-download a later revision of the PDF for free (contact me if you have problems).

If you would like a version in ePub (.epub) form for your eBook reader device, please contact me. I do have a .epub file of v2.3 but it is not quite as nice as the PDF due to the limitations of the epub format.

eBook #2?

I am now thinking about writing another E2B eBook and there are a number of possible topics, three of which are listed below.

E2B v1.A1b and c Beta now available

v1.A1c

• Adjust_E2B_Menu.mnu has been improved so it is now loaded as a separate menu.
• PimpMyDrive.cmd now adds Adjust_E2B_Menu.mnu to the PIMP folder.
• E2B now automatically looks for menu wallpaper files for each sub-menu (see below). Now you can just add .bmp or .jpg files and they will automatically be used for the background image for that menu - no .mnu files are required.

How to add new menu folders to Easy2Boot (e.g. BIOS Flash tools)

If you are a Tech, you may want to keep many BIOS Flash utilities on your E2B USB drive for each of the different models that you encounter.

So you may wish to have a menu structure like this:

Main Menu -> BIOS Flash Menu -> [Manufacturer] -> [Series]


For instance for Lenovo T-series systems, the menu structure would be:

Main Menu - BIOS Flash Menu - Lenovo - T Series - T560_v1.25.imgPTN

E2B v1.A1a Beta available

1.A1a Beta

• Add 'WARNING: Some types of AV software can cause ChocBox.cmd to run extremely slowly' to chockbox.cmd. 
• Improve Adjust_E2B_Menu.mnu sample menu file so the user can change menu colours from within the menu. 
• Add \_ISO\docs\Multiple Backgrounds folder - read the ReadMe.txt file and use the ready-made files included. 
• Menu wallpaper files can now have .jpg file extension as well as .bmp, e.g. \_ISO\WIN10.jpg.

I found that my Comodo AntiVirus software was causing Chocolatey (and thus ChocBox.cmd) to run extremely slowly. Just disabling it was not enough to fix the problem as the task was still running in the background - I had to either kill the Comodo AV task or uninstall it!

The Adjust_E2B_Menu.mnu sample .mnu file now lets you change the menu text colours as well as other menu settings.

I have added a new \_ISO\docs\Multiple Backgrounds folder with instructions to help you set up your E2B USB drive to load a different background wallpaper for each menu. The most difficult thing now is actually making the 18 different 800x600 wallpaper jpg files required! You can add your own menu heading to each wallpaper graphics file and remove the E2B text heading from the menu if you wish.

1. Use the "\_ISO\docs\Templates\CenteredMenu\MyE2B.cfg" for your \_ISO\MyE2B.cfg file.

2. Follow the instructions in the \_ISO\docs\Multiple Backgrounds\ReadMe.txt file.

3. Tweak the \_ISO\MyE2B.cfg file to remove the menu heading (and footer help text and menu entry help text) if you wish.

More info at http://www.easy2boot.com/configuring-e2b/multiple-backgrounds/

Amazon Prime day!

If you are an Amazon Prime member (hint: you can sign up for a 30-day trial for free!) then there are lots of bargains to be had today and tomorrow only.

Unsurprisingly, the best deals are available on Amazon kit, but there are also good reductions on some high-priced goods as well of over 50%!

Here are a few bargains for US and UK clients (affiliated links):

Amazon.co.uk

£100 off Echo Show - Black (Best bargain!)
£39 off SanDisk Ultra 3D SSD 1TB up to 560MB/s Read/up to 530MB/s Write
£22 off SanDisk Extreme Pro 64 GB 160 MB/s CompactFlash Memory Card - Black/Gold/Red
£35 off SanDisk SSD PLUS 960 GB Sata III 2.5 Inch Internal SSD, Up to 535 MB/s
£15 off SanDisk Ultra Fit 128 GB USB Flash Drive USB 3.0 up to 150 MB/s
£15 off Fire TV stick
Canon EOS and Sony camera bargains

Click here for more Amazon UK deals.

Free Amazon Prime 30-day trial.


Amazon.com

Note: Some deals don't start till later today.

$100 off Echo Show
$30 off Echo 2nd generation
$20 off Fire TV stick

$110 off Toshiba 50-inch 4K Ultra HD Smart LED TV with HDR - Fire TV Edition

Click here for more deals.

Free Amazon Prime 30-day trial

Easy2Boot v1.A0 is now released

Change from v1.99 are:

• New grub4dos \grldr (2018-07-01) supporting centering of menu entries and menu help text (new grub4dos setmenu --middle-align command).
• Three new Themes added to demonstrate centred text menu entries.
• New \_ISO\docs\Sample mnu files\E2B Menus\Adjust_E2B_Menu.mnu menu.
• TimeDiskAccess.mnu added - allows user to test raw sector read speed under BIOS of all drives in system. Useful for comparing USB+BIOS driver performance.
• New SHORT_HL variable can be used to set the highlighted menu entry to only highlight the menu text and not the whole menu line. 
• UPDATE_E2B_DRIVE.cmd now checks in case the user has renamed some of the standard E2B .mnu files (e.g. ZZSubmenuAll.mnu) and asks user if they want to delete them or keep them.
• New version of E2B_Editor.exe now uses 24-bit colour values for the heading and footer colours.
• STRINGS.txt files changed - no need to pad out menu headings.
• Small bug fix to remove extra space after menu entries in sample .mnu files.
• KBD_QWERTY_USA keyboard file added so can pick using E2B_Editor.
• Bugfixes to internal handling of menu positioning, etc.
• Bugfix for v1.99 - MAKE_CONTIG.cmd script is now copied across when making an E2B drive (running Update did copy it across but Make_E2B_USB_Drive.cmd did not copy it across).
• Small fixes to centre menu heading when UTF-8 characters used (e.g. Arabic, Chinese, etc.).
• If the FONT variable's path contains ".f24" then 24-high fonts will automatically be used. 
• Small changes to Check_for_Update.cmd and UPDATE_E2B_DRIVE.cmd to display E2B version numbers.
• Some of the .cmd files are now modified to use %WINDIR%\System32\find.exe in case users Windows Path environment variable points to a different version of find.exe.

The new downloads are available on the Alternate Download Areas (see side bar of this blog).

The www.easy2boot.com site download links will be updated in a few days.

MPI Tool Kit v0.083 now available

The new version is available from the Alternate Download Sites (e.g. OneDrive)

MakePartImage.cmd has now been modified to estimate the size of the .imgPTN file needed by using 7z.exe. It is now much more accurate (but takes a bit longer) and the 'Suggested size' seems to always work now (at least on the 100 files I have tested so far...). It also has better error handling.

Note that you should only run one instance of MakePartImage at a time and it does not seem to work if the target folder is a Microsoft Storage Pool volume (ImDisk issue?).

The script Convert_all_ISOs_to_imgPTN_Files (run as Admin).cmd which is in the Utils folder of the MPI Tool Kit folder has also been improved. This batch file allows you to convert all the isos in a folder (and subfolders) without needing to answer the usual questions from MakePartImage or press ENTER. Just go and get a cup of coffee and the .imgPTN files should all be there when you come back.

(You still need to answer the delete/make EI.cfg question though for Windows Install ISOs).

You can now specify a partial file spec (e.g.  fed*.iso) and ask it to re-make all .imgPTN files again or only the missing ones. It also does not have to be an iso (e.g. you can use *.ima or dlc*.zip).

If you select AUTORUN, it will also use the 'best guess' for the Syslinux version rather than prompt you for which version to use.

0.083 is not yet released on the official www.easy2boot.com website as it is considered a 'Release Candidate' at the moment.

Please let me know how you get on if you try it.

P.S. 0.083 is now available on the www.easy2boot.com website - it is a slightly different version from the RC candidate. The new version is dated 2018-07-10.

E2B v1.A0b Beta now available

Download from Alternate Download Areas as ZIP file.

Changes are:

• New grldr (2018-07-01)
• New \_ISO\docs\Sample mnu files\E2B Menus\Adjust_E2B_Menu.mnu menu
• Bugfixes to internal menu positioning, etc.
• Bugfix for Make_E2B_USB_DRIVE.cmd v1.99 - MAKE_CONTIG.cmd script is now copied across when making an E2B drive (running UPDATE_E2B_DRIVE.cmd did copy it across but Make_E2B did not).
• UPDATE_E2B_DRIVE.CMD now displays latest stable and Beta versions that are available (using web access).

Copy Adjust_E2B_Menu.mnu to your MAINMENU folder and you can tinker with moving the menu about instantly...

E2B v1.A0a Beta available!

Since the last version was 1.99, the next version will be 1.A0.

So the first Beta is called v1.A0a

This version has a new Beta version of grub4dos (not yet officially released) to which the developer yaya has kindly added some new features.

We can now ask grub4dos to center the menu entries and the menu help text automatically.

Here are some screenshots:

Revision 2 of the E2B eBook is now available

Revision 2 is now available. It has slightly more content, more pictures and hopefully less typos thanks to 'Glen'.

If you had previously ordered the Easy2Boot 'Getting started with Easy2Boot' PDF from Payhip, then you should be able to use the download link in the email that you received to re-download the new revision 2 PDF. If not, then contact me.

- o O o -

P.S. My cat is really annoying me at the moment because I can only feed him after sunset which, in the UK, is well after 9pm. Still, there are only a few more days to go until June 24th when Ramadan finishes (you see, he's a Persian cat!)...😹

New Hiren's WinPE 10 64-bit ISO

Just found this post on reddit about a new Hiren's type WinPE.

It is not an official Hiren ISO but is made by a 'fan group' - see here for more info.

E2B v1.99 is now re-issued - please update!

There was a small bug in the grub4dos version of E2B v1.99, so I have updated the download with a new version of grub4dos (plus a few other very minor changes).

v1.99 is not yet available on the E2B website, so only users who read this blog and have downloaded the old v1.99 will be affected.

The \grldr file should be dated 2018-06-18 in the latest version of E2B v1.99.

The small bug in the old grub4dos version was that the animated E2B icon could spontaneously disappear when using the menu cursor keys.

Having trouble 'Safely Removing' USB Hard drives with the latest Windows 10?

I have been using 'Disk Ejector' from QuickandEasySoftware (free).

You can copy it to your Desktop or to the E2B USB drive.

You can also try USB Safely Remove from http://safelyremove.com as an alternative.

How to prompt for ComputerName and UserName before you start an automated Windows Install

By using an XML file, we can automate the installation of Windows 10 in Easy2Boot.

The XML file can have a preset or random UserName and ComputerName, or it can be configured to only have an Administrator account or to prompt for the User Name near the end of the installation process.

For instance, an XML file for SDI_CHOCO could be picked by the user and a fully unattended and automated Windows 10 install would then proceed.

However, it would be useful if we could use the same automated XML file each time we installed it to a different system, but could prompt for a different ComputerName and UserName before we started the installation. This allows us to get a cup of coffee whilst ten different systems are installing without having to come back and enter the UserName half-way through.

See also this later blog post for automatically setting the Serial Number in the ComputerName based on the same method as used in this article.

We can set different values by using grub4dos to modify the XML file before we boot to the ISO...

E2B v1.99 now available

At last E2B v1.99 is now available!

Note: I have just quickly updated the 2018-06-18 download to v1.99 2018-06-16 - the more recent version just has improved help in Make_E2B.exe, a small bugfix to grub4dos and a new sample mnu file added.

Note: The new eBook is written for use with E2B v1.99.

Changes from E2B v1.98 are:

Bob Omb's WinPE10 64-bit v.3.1

Bob's latest release of WinPE 10 64-bit (v3.1) can now work either as a .ISO file in E2B or as a .imgPTN file.

If you boot it as an ISO, it will auto-detect the TheOven_Startup.cmd (if present on your E2B drive) and run PEStartup (see here for details).

Tip: End the filename with the letter Q to suppress E2B's QRUN prompt - e.g. Bob_Omb's_v3.1_64q.iso. Do not use spaces in the filename because WinBuilder ISOs don't work correctly if there is a space in the name. The file extension must be .iso.

Instead, you can create a .txt file using the \_ISO\TXT_Maker.exe file. This allows you to have spaces in the menu entry (e.g. 'Bob Omb's WinPE10 64-bit'). The ISO must not have any spaces and must end in .iso. You can also use the '64-bit' option in TXT_Maker so that the ISO will only be listed in the menu if run on a 64-bit system.

UEFI

If you convert the ISO to a FAT32 .imgPTN file, you will be able to MBR or UEFI-boot to it and also have some persistence. I suggest you increase the suggested size when you make the .imgPTN file, to allow you to add your own portable apps, shortcuts, etc.

E2B v1.99h Beta available

• This version has the latest version of grub4dos 0.4.6a 2018-06-08
• Also a Sample .mnu file Run_ISO_With_Alarm.mnu added (sounds an alarm before running ISO) has been added.
• PimpMyDrive.cmd now adds a 'Play a tune' menu to the Main menu.
• Alarm.g4b added to \_ISO\e2b\grub folder so just issuing the command 'alarm' will sound an alarm.

This is probably the last Beta before release as E2B v1.99 full release, so let me know if you find any issues.

As before, if you have animated graphics displaying and you also simultaneously play a tune, the tune may play slower than it should unless you stop the animation (press F2 to toggle animation on and off). Any key press will stop the tune from playing.

Download from Alternate Download areas or direct link here.

Intel Processor Diagnostic Tools

This Intel Windows 64-bit (and 32-bit) tool will identify your CPU and stress test the CPU cooling solution in your system.

You first need to install the software onto Windows before running it.

Intel Processor Diagnostic Tool (May 2018)

Other tools

Other Intel tools can be found here.

The bootable CPU Identification tool and CPU Frequency ID tool are Windows .exe utilities which make a bootable DOS floppy (wow - it's so useful to have a bootable floppy disk these days!), or a .imz floppy disk image file from which you can extract a bootable .ima file using 7Zip.

However, if you download the files (various languages are available), you can use 7Zip to extract the .com file directly from the .exe download (e.g. extract BPFREQIDE.com or BPROCIDE.com) and simply copy the .com file to your E2B USB drive (e.g. \INTEL folder).

Then you can boot to the FreeDOS floppy image which is already on your E2B drive (DOS Menu) and run the .com files from FreeDOS (e.g. \INTEL\BPROCIDE.com).

This screenshot is from Virtual Box, so ignore CPU results!

Intel® Processor Frequency ID Utility Installation Guide - Bootable Version (2004)

Intel® Processor Identification Utility Download - Bootable Version (2015)

E2B v1.99g Beta is now available (in .zip format)

The new download is available from the Alternate Download Areas as usual, but only in .zip format because it should be regarded as a Beta version.

These are the additional changes since v1.99f:

1. Non-contiguous files are now flagged when enumerating files (press SPACEBAR twice quickly to pause the file listing). If the files listed are not contiguous, they will be displayed in the list with the text *** NOT CONTIGUOUS *** appended.
2. Non-contiguous .imgPTN files are flagged on the menu entry itself (because they won't work!). The menu entry will have the text (ERROR: NOT CONTIGUOUS) appended.
3. Force_Windows_Safe_Mode .cmd files added. This allows you to change the BCD of the current system (see below).
4. C't magazine Desinfect 2018 sample .mnu file added (see below).

Upcoming Amazon Echo offers

Hi
Just a heads-up, apparently there is an Amazon Echo Sale coming up starting 26th May.

Use the links below after 25th May to get $10 and $15 off.

Echo Dot (affiliated link to Amazon.com)

Echo  (affiliated link to Amazon.com)

I have an Echo (in the kitchen) and an Echo Dot (in the bedroom) and find them really useful for...

1. Reminders ' Alexa - remind me to call Fred at 3pm' (I also get an alert on my phone)
2. Play radio or music 'Alexa - play BBC Radio 4'
3. Radio Alarm clock 'Alexa - set an alarm for 8am every day and play BBC Radio 4'
4. Calculations - 'Alexa - what's 297.2 minus 167.6' and 'Alexa - what's 127 dollars in pounds?'
5. Shopping list 'Alexa - add yoghurt to my shopping list' (can see list on phone when I go shopping)
6. News - 'Alexa - give me a flash briefing'
7. Music - 'Alexa - play Blue by Joni Mitchell' (Amazon Prime or Spotify account required)
8. Queries - 'Alexa - what are Asimov's 3 laws of Robotics'
9. Vanity or scary - 'Alexa - who is the fairest of them all?' and 'Alexa - open the pod bay doors'
10. Internet calls - 'Alexa - drop in on mum'  (immediately connects me to mum's Echo at her house so I can hear what's going on - e.g. snoring!)

Six new USB-boot eBooks are now available!

Get my eBooks on VENTOY, GRUB4DOS and E2B. Perfect for the beginner or 'experts'. Learn the secrets of legacy and UEFI/Secure booting. Get all your ISOs and payload images on one USB stick or disk and then customise it. Many tips and tricks included. This will save you months!

EBook #1 includes instructions on how to remove the 5 second blue-and-white start-up E2B banner screen.

E2B eBooks are downloadable PDF files here (payable via PayPal or card).

See instructions in eBook #1 to remove this banner.

• EBook #1 'Getting started with Easy2Boot'
• EBook #2 'How to install Microsoft Windows using Easy2Boot'
• EBook #3 'How to make a UEFI multi-boot Easy2Boot USB drive using .imgPTN files' has instructions on how to make a UEFI multiboot E2B drive (no MBR\Legacy boot required) and includes links to the pre-made download files. Uses .imgPTN files which are useful for Secure Boot payloads (no shim is used).
• EBook #4 'UEFI-multiboot using the a1ive grub2 File Manager'  is on direct UEFI booting from .ISO, .WIM, .VHD, .EFI, .IMG files, etc. using the UEFI agFM File Manager and supports Secure Boot.
• 'Getting started with grub4dos'
• 'Getting started with Ventoy'

Updated revisions are available free to previous eBook buyers by using the link in the email receipt that will be sent to you when you purchase the eBooks.

The 'Getting started with grub4dos/Ventoy' eBooks are not specifically about E2B, and have all the information you need to get you started on making your own grub4dos or Ventoy boot menu system and USB disk.

Click here - E2B eBooks

E2B v1.99f Beta (includes feature to play tunes!)

yaya, one of the main developers of grub4dos, has done a lot of work to add a 'beep' command to grub4dos. It can play synchronously (in background) or asynchronously (waits until end of play before continuing execution).

E2B v1.99f (was 1.99e) includes this latest \grldr file (grub4dos 0.4.6a) which has the new beep command.

Now you can load the E2B Main menu and simultaneously play the Mission Impossible or Tetris background music (or any tune you like)! Your system must be fitted with an internal speaker (or buzzer) - Virtual Machines will not make any noise, you must use a real system.

Instructions to update your E2B drive

Installing Windows Embedded POSReady 2009

The POS2009 ISO is a bit different from normal XP ISOs in that it has no 2nd stage boot and it requires a 'flat-file' structure and \i386 folder on the installation media to be present during the 2nd boot.

There is a ReadMe file at \_ISO\docs\Sample mnu Files\Windows\POS2009_ReadMe.txt on the E2B drive which can be used to install POS2009 to an IDE hard drive.

E2B v1.99 contains revised instructions for guidance on how you can install to SATA\RAID\SCSI disk too.

The ReadMe file in v1.99 is shown below: