Saturday, 16 August 2014

Add Desinfect 2014 + Persistence to your Easy2Boot multiboot USB drive

As with most ISO files, you can just add the Desinfect 2014 ISO file to your Easy2Boot USB drive and boot from it in BIOS/MBR mode - OR - you can drag-and-drop the ISO onto the MPI Toolkit FAT32 Windows Desktop icon to make a partition image file and then add the ct_desinfect_2014.imgPTN file to your Easy2Boot drive, if you want to 64-bit UEFI-boot to Desinfect as well as MBR-boot.

If you want to enable persistence however, you will need to use a special .mnu file as well as the Desinfect ISO file.

Adding a persistence ext2 file allows some Desktop settings to be remembered after a reboot. For instance, any files placed on the Desktop will be preserved. However, the background wallpaper is reset to the Desinfect wallpaper after every boot.

I also could not get the antivirus updates to be persistent using this method, they have to be downloaded each time you boot to Desinfect.

Note: You can have persistent updates, but not with persistence as well - see the next blog post!

Here is the .mnu file. The top lines are comment lines and contain instructions on how to add persistence. The .mnu file is also available in the Alternate Download Area from here.

# Make a \casper-rw ext2 file using RMPrepUSB in the root of the drive using RMPrepUSB
# File Name=desinfect-rw  Volume Name=casper-rw size=500MB or change as desired
# Place this .mnu file and the ISO in either \_ISO\MainMenu\MNU or \_ISO\LINUX\MNU
# This menu will work even on an NTFS USB boot drive
# IMPORTANT: you MUST run WinContig (Ctrl+F2) before booting E2B.

iftitle [if exist $HOME$/ct_Desinfect_2014.iso] Desinfect 2014 PERSISTENT\n Boot using .mnu file with persistence
if exist CD echo WARNING: Cannot use partnew command! && pause && configfile (bd)/menu.lst
if "%E2BDEV%"=="" set E2BDEV=hd0 && pause E2BDEV forced to hd0!
set ISO=ct_Desinfect_2014.iso
set PER=/desinfect-rw
#enable parttype output
debug 1
# make empty table entry in 3rd position in ptn table
parttype (%E2BDEV%,2) | set check=
debug off
set check=%check:~-5,4%
if "%check%"=="0x00" partnew (%E2BDEV%,2) 0 0 0
if not "%check%"=="0x00" echo WARNING: PTN TABLE 3 IS ALREADY IN USE - PERSISTENCE MAY NOT WORK! && pause
debug 1
if not exist %PER% echo WARNING: %PER% persistence file not found! && pause
errorcheck off
set P=0
if "%check%"=="0x00" partnew (%E2BDEV%,2) 0x0 %PER% && set P=1
errorcheck on

set L=debian-installer/language=de console-setup/layoutcode?=de
set ask=
#English text below can be changed to German
if "%P%"=="1" echo -e PERSISTENCE IS ENABLED: Some settings, Desktop items, etc. will be remembered after reboot.\n\nNote: The background will always be reset back to the Desinfect wallpaper.\n      Virus updates are not persistent.\n      Always SHUTDOWN correctly to avoid corrupting the persistence file.\n

set /p:3 ask=Press E and [Enter] for English (within 3 seconds)... 

if /i "%ask%"=="E" set L=
#set L=debian-installer/language=en console-setup/layoutcode?=en

#map ptn 4 to ISO
partnew (%E2BDEV%,3) 0x0 $HOME$/%ISO%
map $HOME$/%ISO% (0xff)
map --hook
root (0xff)
set A=file=/cdrom/preseed/ubuntu.seed boot=casper 
set B=iso-scan/filename=
set INTISO=/software/desinfect-2014.iso
set C=quiet splash memtest=4 -- 
set D=persistent persistent-path=/
if not exist %INTISO% echo ERROR: INTISO is set to %INTISO% but it is not present inside %ISO% && pause

kernel /casper/vmlinuz %A% %B%%INTISO% %C% %L% %D%
initrd /casper/initrd.lz

Note that the ct_Desinfect_2104.iso file actually contains a second ISO file inside it (/software/desinfect-2104.iso). It is this ISO file that we must use for the iso-scan/filename parameter.