Thursday 11 July 2013

E2B v1.03 available (includes DPMS2)

Easy2Boot v1.03 can now be downloaded here.

It is essentially v1.01 of E2B + DPMS2 + small changes/bugfixes:

1. DPMS2 added (but not the mass storage drivers - you must download and add these files yourself)
2. New grub4dos version - files/folders can now be sorted alphabetically and are NOT case sensitive (bugfix in grub4dos).
3. Bugfix for large HDDs (>1TB) - E2B reported bad BIOS when it wasn't!
4. Change to XP Step 1 install code - now correct choice is automatically made for the user for most questions.

5 comments:

  1. Hi, thank you for the new release ofg E2B :).

    Do you know if there is any way to use a USB 3.0 External SSD (basically a SSD in a USB 3.0 case) without being forced to put a USB "Helper" Drive to install a windows 7 iso ?

    That would be awesome.

    ReplyDelete
  2. No, sorry. USB HDD controllers all report the device as a fixed disk and not a removable disk so it won't work. When Windows boots it will use it's drivers to interrogate all the devices.

    The only way I can suggest it to take apart an old working USB pendrive and solder the connections to USB HDD circuit board (piggy-back the two).

    ReplyDelete
  3. Ok thanks anyway, I think I'll buy a high speed 128GB pendrive then ^^

    ReplyDelete
  4. i use this howto:

    https://sites.google.com/a/rmprepusb.com/www/_/rsrc/1363615586577/tutorials/72---easyboot---a-grubdos-multiboot-drive-that-is-easy-to-maintain/e2bv1/Easy2Boot.jpg?height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400&height=343&width=400

    athttp://www.rmprepusb.com/tutorials/72---easyboot---a-grubdos-multiboot-drive-that-is-easy-to-maintain/e2bv1

    but the step:
    "2. Now click the Install grub4dos button (see '2' =>' in the screenshot below) and install grub4dos to the MBR (answer 'Yes') and copy over the grldr file. You must use a 21st May 2013 or later version of the grldr file (this is automatically copied over by RMPrepUSB but it is also in the E2B download).

    "

    let my USB-stick throws error, that the grldr file is too old for grubdos. i am using: Install_RMPrepUSB_Full_v2.1.707a

    ReplyDelete
  5. You need to use the grldr that is in E2B v.103.

    ReplyDelete