Easy2Boot v1 BETA24 available

Mainly changes to 'WinXP install using WinPE ISO' menu.
subfolders under \_ISO\AUTO removed as causing confusion (make your own subfolders if you want them).


\

Easy2Boot v1 BETA23 available

This version has quite a few changes, so probably best to start with a fresh USB drive rather than overwrite your existing USB drive (it will work, but you may get lots old files left which are no longer used by BETA23 if you just overwrite your old version with the new one).

Changes are:
1. Bugfix for .mnu items in MainMenu when FastLoad enabled (didn't show in menu on reboot!)
2. Some batch files did not load using insmod because grub4dos has a 8.3 filename limitation on any file loaded by insmod.  This means quite a few \grub\*.g4b batch files have been renamed to 8.3 or shorter so they can be loaded into memory.
3. Can now have up to 10 XP ISO files of any name you like listed in the XP menu.
    To do this copy the \_ISO\E2B\MYXPISOS.g4b file to the \_ISO\Windows\XP and edit it.
    There are 10 sets of these lines. Just change the ISO filename and title to match your ISOs.

    set TXP1=XP PRO SP3 (32)
    set XP1=XPPROSP3.iso

Note: There have been quite a few changes, so this may have a few bugs that I have not yet found!


BETA32 can be downloaded here

RMPrepUSB v2.1.702 now formats as exFAT and is grub4dos bootable

I have added an exFAT radio button to RMPrepUSB. You can format with a BOOTMGR bootsector or a GRLDR bootsector. This means that you can boot grub4dos directly from an exFAT volume if you prepare it with RMPrepUSB.
RMPrepUSB uses the Windows format dlls, so you need XP with the exFAT update installed, or Vista SP1 or later versions of Windows.

Easy2Boot BETA22 v2 now available

Just a small change to runwinnt.cmd (installl XP using WinPE ISO) so that a free drive letter is always used (e.g. Z:). If you are likely to have more than 8 drives in the system that you boot it on (e.g. several HDDs and partitions + maybe a 5-slot card reader) then please update your version of Easy2Boot.
Download here.

Easy2Boot v1 - BETA22 now available

Spanish KBD layout file added
XP install from WinPE modified - can now choose folder where PE ISO is located and can skip partition format and install to an existing (active, primary) partition.
download BETA22

Easy2Boot v1 - BETA21 now available

BETA21 adds a new XP install method.

This uses TWO ISOs!

One is the XP ISO that you want to install, the other is a Vista, Win7 or Win 8 ISO.
It can be a Windows Install (DVD) ISO or just a WinPE (v2/3/4) ISO.

The system will boot to WinPE using the Vista/7/8 ISO and then mount the XP ISO and runs WINNT32.exe to install the files inside the XP ISO onto the pre-formatted hard disk.

You can specify a HDD partition size in the grub4dos menu (HDD0 is wiped)  or you can specify which partition you want to be formatted that is already present on HDD0 once it has booted. You can also specify an unattend.txt file to automate the XP install. This is all done from unmodified ISOs. The XP ISO does not even need to be contiguous!

Also, this is a 1-step process - you do not need to boot back into Easy2Boot again for Step 2.

Because Win7/8 PE has most drivers, there should be no issue with AHCI and mass storage drivers - as long as the drivers are integrated into the XP ISO you are installing (so no F6 to press).

Details are on the website page 72a.

BETA21 is at the very bottom of the page - download -> click here.

PLEASE report back with comments if you have tested this (especially if you have tried the new XP install using WinPE function).
Thanks
Steve

BETA20 now available - new neater folder structure

BETA20 has a changed menu structure which is now much tidier.

I have kept main folder as _ISO as this is useful for Zalman VE200/300 owners. So everything is now under \_ISO.

The \winvblock folder is not needed (AFAICT - not sure why it was in there to start with!!!).

root files

\autounattend.xml

\grldr

\menu.lst

folders

\_ISO\AUTO

\_ISO\MAINMENU

\_ISO\MNU

\_ISO\WINDOWS

\_ISO\E2B

\_ISO\E2B\docs

\_ISO\E2B\firadisk

\_ISO\E2B\grub

The location of the grub folder is configurable if you edit the \menu.lst file, but the location of the firadisk folder and \_ISO folder is fixed, so there is little point in moving the grub folder.

If you want test it out, click BETA20.

P.S. Whilst testing, I found that the autounattend.xml in the root of the flash drive had a problem and the symptom was that Win8 did not run LOADISO.cmd and the blue console windows did not appear, resulting in a 'need CD driver' message. This issue was reproducible, but went away when  I edited the firadisk\auwin8.xml file again (it had been edited to change the file paths).

If you are testing any Vista/7/8 installs and the blue 'LOAD WINDOWS ISO USING FIRADISK' console window does not appear before Setup runs - check the \Autounattend.xml file on the flash drive - in my case the KEY had not been replaced correctly resulting in <KEY12345-AAAAA-BBBBB-CCCCC-DDDD-EEEEE instead of <KEY>12345-AAAAA-BBBBB-CCCCC-DDDD-EEEEE.

Please let me know if you have tested it (especially with windows installs) so I can feel more confident about releasing it and updating the website with the changes...

Easy2Boot BETA19 now available

Dowload BETA19
You can now define the text that appears in the Main Menu for the AUTO, MNU and Windows Install menu entries, and also define the titles of these menus and the default menu item for each in the menu.lst file.
Copy the \grub\menu.lst file to \grub\mymenu.lst and edit it to your own preferences.
The colour of the help text at the bottom of the screen will now be in the same colour as the Menu headings (was always cyan).
If you have made your own mymenu.lst, please make a new one using the new menu.lst file as it has all the extra settings.

I think I am getting near to removing the 'BETA' status now. The full release version will be v1.0.

If you have any suggestions, bug reports or comments please let me know now!

v2. 2013-04-23 Bug found in Win8 menu in first version of BETA19 - please re-download to get version 2 of BETA19.
Also mainmenu.mnu file changed back because the default menu numbering is mucked up by the gaps in the menu!
v3 2013-04-24 Mainmenu.mnu changed so you can delete the \_ISO\MNU and \_ISO\AUTO folders and the menu items for these will not be listed in the Main menu.

Easy2Boot V1 - BETA18 available

Mainly changes and bug fixes to Windows menus.
Win8 now has a menu for an ISO which has a modified EI.CFG (the ISO does not requires a key to be entered before installation) - so this can be used for an All-in-One modified Win8_NOKEY.iso.

The Choose any Win8 ISO menu entry now gives you the choice of 5 keys, or you can enter your own key or you can say that a Product Key is not required (for those ISOs which have a modified ei.cfg file).

Download is on Tutorial 72a page as usual.

Easy2Boot V1 - BETA17 available

Please visit Tutorial 72a to get the latest version

The first item in the menu is now always:

Set default menu item and timeout

This allows you to set the selected high-lighted menu entry on loading and to set a timeout to have it automatically run if desired. A timeout of 0  (immediate boot) is not allowed, so if the user enters 0 then the timeout is switched off.
I have also changed the FASTLOAD menu entry so it just reloads the menu system - it does not reboot any more which should make it faster to reload!