RMPrepUSB, Easy2Boot and USB booting

Tuesday, 2 August 2022

E2B v2.15 released (bugfix for SWP01 error in v2.14)

Please Update to v2.15. There was a problem in v2.14 (the QRUN.g4b batch file was too long as limitation of only 2048 lines of code are allowed in a grub4dos batch file).

The only change is the QRUN.g4b file and the version.txt file.

Monday, 1 August 2022

agFM v1.84 released (bugfix)

Some .img and .vhd files would not boot in Legacy mode when using the 'map' option (which runs grub4dos).

For instance, if you install Medicat to a fixed-size .VHD file, you can boot to it using E2B (as .vhdhdd) or agFM (as either .vhd or .img) or Ventoy (Ventoy requires the extension to be .img) - so use the extension _.vhdhdd.img so that it works on all three.

You can update just by running Ptn2:\e2b\Update agFM\Download and update agFM_v2.cmd.

Note: There is a bug in E2B v1.14 - if you get a 'Cannot find label SWP01' error then please update to v2.15aBeta.

Tuesday, 26 July 2022

E2B v2.14 now fully released

v2.14 is now fully released and is on FossHub for fast download.

There were a few small changes including tweaks to QRUN.g4b and E2B_Editor.exe since the 2.14 version that I made available a few days ago on the Beta Alternate Downloads OneDrive site. You can update again to the full release version if you wish.

The E2B_Editor.exe utility now displays the X-Y co-ordinates of the cursor as well as the colour of the pixel under the cursor in the floating tooltip - as shown below. This may assist you when setting STAMP and ANIMATION co-ordinates.

Easy2Boot v2.14 available

~~E2B v2.14 DPMS is now available here. I will put it on FossHub in a few days but I thought I would make it available to blog subscribers here first.~~

E2B v2.14 is now fully released.

Here are the changes (please feed back any issues if you find any ASAP):

More tips to save on gas/oil/electricity energy bills

If your house has a hot water tank (not a combi-boiler/direct water heater) then a simple tip is to just set the timer so that the hot water will come on for only an hour or so in the morning and then switch off for the rest of the day.

The water in a well-insulated tank will stay quite hot for the rest of the day and should still be warm enough in the evening to do any washing up, face washing, etc. if required (especially in the summer).

Obviously, if you use too much hot water during the day then it will go cold, but you can adjust the timer accordingly. The idea is to not use energy to keep the tank of water hot when you really don't need it to be hot. It is a shame that we cannot have two temperature settings for the hot water because we really only need very hot water when we have a bath\shower and need more than one tank-full of hot water.

Also, if you do not use a lot of hot water in the morning for a shower or bath, then instead of adjusting the temperature by mixing in some cold water, just turn down the hot water thermostat to reduce the temperature of the water in the hot tank. Try reducing the hot water temperature by 2 deg C each week until you find the lowest temperature that suits your usage and preferences.

In Summer we don't really need really hot water from the sink taps anyway and it seems silly to heat a whole tank of water up for the whole day. The rooms near the hot water tank will be cooler too if it is not on all day.

Most domestic appliances are cold-fill only (because most houses have directly heated hot water and it is considered 'more efficient'), however if you have a tank full of hot\warm water available during the day, it is more efficient to use a hot+cold-fill washing machine or dish washer and make good use of that warm water instead of just letting it cool down slowly during the day.

In the winter, you may need to adjust the timer and thermostat settings again.

Free newspapers and magazines for 3 months!

Why not cancel your daily newspaper and magazine subscriptions, save money and also help to save trees at the same time?

Sign up before the end of this month and Readly will give you 3 months for free. After that they will charge you the reduced rate of £8.99 a month for the next 12 months (£9.99 thereafter). You can cancel any time (even in month #3 of the free trial period).

agFM v1.83 released

The new version has a few changes

v1.83 2022-07-21

Add \e2b\update agFM\GetLatestVentoyPluginFiles.cmd.
Improve download speeds. Fix problem of .imgPTN switch-in operation sometimes detecting difference in MBR and offering to restore instead of switching in new imgptn.

GetLatestVentoyPluginFiles.cmd – this downloads the latest plugins required by Ventoy for some functions (Windows vhd plugin, Windows wim plugin, Linux persistence .dat files in a .zip file, bootable ISO to remove Ventoy Secure Boot whitelist key from UEFI BIOS NVRAM).

The files are copied to the \ventoy folder on Partition 1 of the E2B USB drive.

To update your E2B drive, run Make_E2B.exe and click the Update E2B button or run "\e2b\Update agFM\Download and update agFM_v2.cmd".

Note: E2B v2.14 will be also available soon and then I hope to produce a new 'Ventoy for Easy2Boot' version.

Tuesday, 12 July 2022

'Getting started with grub4dos' eBook updated to v1.02

I have updated this eBook.

If you have purchased the eBook already, you can get the updated version using the link in the order confirmation email that you would have received from Payhip.

Saturday, 9 July 2022

FakeFlashTest v1.1.4 updated (now much faster!)

I wrote FakeFlashTest many years ago when a 16GB Flash drive was considered top of the range and very expensive. Time has moved on since then and Flash memory chips are now cheaper and larger.

So FFT v1.1.4 is now much faster and will dynamically adjust it's algorithm to cater for larger drives. Most drives should take less than 5 minutes to test now (and some a lot less).

You can find the latest version here.

Wednesday, 6 July 2022

Easy2Boot v2.14i Beta available

The developer yaya2007 has fixed the UDF ISO bug in grub4dos, so DLC Boot ISOs that are in UDF format (and maybe other ISOs that had problems booting under E2B) are now fixed in E2B v2.14i.

2.14i also has a new menu entry in the UTILITIES menu to display CPU information. Thanks to a1ive for writing the cpuid utility for grub4dos..

2.14h can now boot Tails ISO files (without persistence) even if your E2B USB drive is a fixed disk.

Note 2022-07-13: 2.14i and later uses the latest version of grub4dos which has a BUG! You will get problems with some operations (e.g. Windows Install ISOs give unattend error). Awaiting fix from the developer (grub4efi has same bug!). Late news: Fixed in latest release 2.15.

New CPU Info menu entry