Sunday, 11 July 2021

agFM v1.72 and 'Ventoy for Easy2Boot' v1.0.46 are now fully released

These latest released versions will be installed if you make a new E2B drive, or you can update an existing E2B USB drive:

Instructions - update to agFM  v1.72

Instructions - update to Ventoy for Easy2Boot v1.0.46

Latest E2B is v2.10b (for Win11) - download .zip file and extract files to a new folder and run Make_E2B.exe and then use the Update_E2B button or just extract the files straight onto your E2B USB drive's Partition 1.
Posted by at

23 comments:

  1. Unknown12 July 2021 at 16:09:00 BST

    hi, when i copy ventoy-1.0.46-windows.zip, in add_ventoy.cmd
    the result is


    **********************************
    * *
    * Add Ventoy to Easy2Boot *
    * *
    * Usage: *
    * Drag-and-drop Ventoy .zip file *
    * onto this file. *
    * *
    **********************************

    Extracts Ventoy files and adds them to Partiton 2 of the E2B drive

    Ventoy .zip file should be downloaded from https://github.com/ventoy/Ventoy/releases

    Looking for \e2b\grubfm.iso on Partition 2...

    FOUND E2B PARTITION 2 at I:

    SOURCE=I:\e2b\Update agFM\ventoy-1.0.46-windows.zip
    DESTINATION=I:

    Extracting to temporary folder at C:\Users\YO\AppData\Local\Temp\ventoy

    Downloading core.img from github...
    12/07/2021 17:08 369.650 core.img

    FOLDERS TO COPY
    ===============
    EFI
    grub
    tool
    ventoy

    ventoyia32.efi
    ventoyx64.efi

    All folders need to be copied to Partition 2 of the E2B drive...

    Ventoy v1.0.32 is currently installed.

    OK to copy all Ventoy v1.0.46 folders to I:\ ? (Y/N) : y
    Copying files...
    Error de creación de archivo: El parámetro no es correcto.

    No se puede crear el directorio: I:\
    0 archivo(s) copiado(s)
    Ventoy v1.0.32 is now installed.


    Presione una tecla para continuar . . .

    what have bad in the process???, thanks

    ReplyDelete
  2. Steve Si12 July 2021 at 16:18:00 BST

    You cannot use original Ventoy zip file from github!
    You must use the E2B version.
    Just run \e2b\Update agFM\Update_to_latest_Ventoy_version.cmd

    ReplyDelete
  3. Unknown12 July 2021 at 16:24:00 BST

    The result is the same , i executed update_lo_latest_ventoy_version.cmd



    **********************************
    * *
    * Add Ventoy to Easy2Boot *
    * *
    * Usage: *
    * Drag-and-drop Ventoy .zip file *
    * onto this file. *
    * *
    **********************************

    Extracts Ventoy files and adds them to Partiton 2 of the E2B drive

    Ventoy .zip file should be downloaded from https://github.com/ventoy/Ventoy/releases

    Looking for \e2b\grubfm.iso on Partition 2...

    FOUND E2B PARTITION 2 at I:

    SOURCE=Ventoy_E2B_download_files.zip
    DESTINATION=I:

    Extracting to temporary folder at C:\Users\YO\AppData\Local\Temp\ventoy

    INFORMATION: Correct core.img found in zip file

    FOLDERS TO COPY
    ===============
    EFI
    grub
    tool
    ventoy

    ventoyia32.efi
    ventoyx64.efi

    All folders need to be copied to Partition 2 of the E2B drive...

    Ventoy v1.0.32 is currently installed.

    OK to copy all Ventoy v1.0.46 folders to I:\ ? (Y/N) : y
    Copying files...
    Error de creación de archivo: El parámetro no es correcto.

    No se puede crear el directorio: I:\
    0 archivo(s) copiado(s)
    Ventoy v1.0.32 is now installed.


    Presione una tecla para continuar . . .

    ReplyDelete
  4. Steve Si12 July 2021 at 16:27:00 BST

    Maybe not enough space on I:?

    ReplyDelete
  5. Unknown14 July 2021 at 17:37:00 BST

    509mb free of 651 mb

    ReplyDelete
    Replies
    1. Steve Si14 July 2021 at 18:01:00 BST

      All it is doing at that point is copying some files to Partition 2 of the USB drive.
      Maybe you have a faulty USB drive?
      Try copying some large 100MB+ video files to Partition 2 of the USB drive and see if they play OK from the USB drive or run FakeFlashTest or try another USB drive?

      Delete
  6. Unknown24 June 2022 at 20:44:00 BST

    Hello, how are you, after several updates of the latest versions, I have found that when installing windows 10 when choosing the option to install w10, without prompt, in the installation I get a screen with this error, what can I do?

    Administrator: Load windows iso usin imdisk

    found usb drive at drive d:

    imsdis driver installed successfully.

    looking for "\_iso\windows\win10\windows10-21h2x64español.cmd"
    using \_iso\windows\win10\windows10-21h2x64español.iso
    mounting iso as y:...
    creating device...
    error creating virtual disk:
    The system cannot find the specified file.
    warning: install.* not found!
    Press a key to continue

    ReplyDelete
    Replies
    1. Steve Si24 June 2022 at 20:53:00 BST

      Open iso on usb drive and see if sources/install.wim or install.esd exists.
      Try simple name without Spanish characters?

      Delete
    2. Unknown24 June 2022 at 21:04:00 BST

      in souces exists sources/install.esd , install.wim not exist.I will try the iso with another name, although I think that is not the problem and I inform..

      I have generated with the meidacreationtool21h2.exe tool, an iso that I have copied to iso\win10\ , and it gives me that error.

      With the same tool I have generated a usb, and that one does load the installation for me.

      Delete
    3. Steve Si24 June 2022 at 21:10:00 BST

      Ok. If still fails give details. What iso, bit, language, dual or single. Using e2b legacy menu, agFM or ventoy, or uefi 64 or Uefi32,etc

      Delete
    4. Unknown25 June 2022 at 10:39:00 BST

      Hi again Steve, and thanks for the answers and help in advance.

      Good, I add version information and how the error occurs.
      The first thing when removing the ñ , it has progressed in the installation, but finally it gives me an error like the installation files are not available, if this iso , I generate it directly in a pure usb, the installation launches without problems, but if I copy that iso of the windows generator to the pendrive, so the final error is the following, after loading the installation files:

      windows installation problem
      windows cannot install the required files. Make sure that all the files required for the installation are available and restart the installation with error code 0x8007025D.

      This error comes out executing the legacy option, whether I use wimboot or not, also when I click on the option to press any key if you want to repair the computer, in the 3 options.

      If this image is generated by the windows tool, I generate it to a usb, it installs w10 without problem, but if I generate iso and copy it to e2b, it gives the error mentioned above in the installation.

      I choose in the generation of the iso in the w10 tool only x64, in Spanish and unchecking the option to adjust the options to this pc.

      Information:
      The iso is an iso of windows 10 x64 only, in Spanish.
      Generated from the Microsoft tool MediaCreationTool21H2.exe

      I use the legacy option, since the laptop I'm trying to install it on doesn't have uefi.
      The e2b pendrive has the versions
      windy : 1,057
      agfm version 1.80
      e2bversion: 2.13

      Delete
    5. Steve Si25 June 2022 at 11:00:00 BST

      I tested same ISO, I think (4.30 GB (4,625,989,632 bytes))
      I installed Win10 Pro x64 Espanol using E2B legacy menu.
      CRC32: 5161C8D6
      MD5: 5E049F3BD89C5EFF374A62FD7FF24134
      SHA-1: 8903659BA0942BA607813D2B0AF71FABC6F7995A
      It installed without any problem.
      Maybe the ISO file on your USB drive is corrupt?

      Delete
    6. Unknown25 June 2022 at 11:08:00 BST

      I have generated it several times and copied it to various usbs that I have with e2b, and it always gives me an error, however when I launch it from the pure usb generated the iso in it directly from the tool if it installs it...

      If you can send me a link to the iso that you installed correctly and I'll try it, if not, I may have to generate a USB with e2b from 0 and try, because I don't see an explanation...

      Delete
    7. Steve Si25 June 2022 at 11:13:00 BST

      You need to compare the checksum/hash of the ISO file that you downloaded with the ISO file ON THE USB DRIVE. The usual problem is that the file ON THE USB DRIVE is corrupt.
      https://www.majorgeeks.com/files/details/hashtab.html

      Delete
    8. Unknown25 June 2022 at 11:30:00 BST

      Hash comparado ok A062E981

      Delete
    9. Steve Si25 June 2022 at 11:34:00 BST

      Once Windows setup starts, any problem like this is due to corrupt ISO. Either the ISO was corrupted during download or after copying to the USB drive. Try opening the ISO in 7Zip and then opening the \sources\install.wim iso in 7zip. Otherwise re-download the ISO.

      Delete
    10. Unknown25 June 2022 at 11:41:00 BST

      Thanks again for all your help Steve.
      As I put you above there is no install.wim, there is an install.esd inside sources, the iso, launched in a pure usb, is installed, in fact, I have generated an iso of the complete structure generated in the pure usb and it gives the same error, I have downloaded 2 other different isos, compared the hashtab, and it keeps giving me the error...

      One of the USBs that I have with e2b, I will generate it from 0 and try because it doesn't make sense, yesterday I also tried the installation on another PC, and the error is always the same.

      It has opened the iso with 7zip, and within sources is install.esd, what do I have to do with 7zip????

      Delete
    11. Steve Si25 June 2022 at 11:44:00 BST

      just double-click on install.esd from within 7zip to open the install.esd file - see if any errors.

      Delete
    12. Unknown25 June 2022 at 12:29:00 BST

      I click , and i see the estructure of install.esd, i dont know the problem, i generated e2b of 0, and the error continue...

      Delete
    13. Steve Si25 June 2022 at 12:35:00 BST

      How many different PCs did you test on and how many different USB drives? Are you using USB 3 drive on USB 3 port? If so, try using USB 2 port or connect USB 2 extension cable. Maybe it is a data I/O integrity problem on USB signals?

      Delete
    14. Unknown25 June 2022 at 19:39:00 BST

      I've got an image that does work with e2b, downloaded from the hidoc.net windows iso downloader tool.
      I don't know why, e2b doesn't like the iso generated by the official microsoft tool, but the one downloaded by the above tool does.

      And, repeat that with the microsoft utility generating a usb, it also installed it correctly.

      Thanks Steve for the help and answers

      Delete
    15. Steve Si25 June 2022 at 19:43:00 BST

      Well I downloaded the same ISO yesterday and it was fine for me. Did you also try agFM and Ventoy with the 'bad' ISO?

      Delete
    16. Unknown29 June 2022 at 14:12:00 BST

      i deleted, the image, sorry, thanks for the help

      Delete

Subscribe to: Post Comments (Atom)