E2B progress report

I recently received a nearly new pre-owned Lenovo 300 IdeaPad i5 2TB 8GB notebook. It was a refurbished laptop which I won on eBay (exdemolaptops if you are interested). One of the main requirements for me was a bottom hatch that allows me to quickly swap the hard disk and of course, USB ports!
It has one USB 3 port and two USB 2 ports. I swapped over the 1TB spinny-thing for a 120GB SSD so that I could do Windows Installs as quickly as possible for testing the new Snappy+Choco version of E2B. A completely automated Win10Pro install, including installing 19 drivers and 2 applications takes under 15 minutes.

Thankfully, CSM and UEFI-booting are easily selectable (via Fn+F12) and booting to E2B is really fast on the USB 3 port too!

Automatically install drivers with Snappy Driver Installer

Today I discovered Snappy Driver Installer (SDI). It has been around for a while but I had not heard of it before.

If you don't have all the DriverPacks it needs, SDI will download them via torrents, but it can take a while...

You can download this utility to a USB drive and just run it from any Windows system (XP->Win10, 32-bit or 64-bit). It will look at your hardware and current Windows drivers and then search for a better driver within it's Driverpacks and then install it. The downloads are in 'Driver Packs'. A full download will take 13GB of drive space if you want all the driver packs, or it can be asked to download just the ones you need.

The nice thing about SDI is that you can also run it from the command line and it can be automated.

So using SDI and a few scripts, I added some new folders to my Easy2Boot USB drive.

The folder structure on the E2B USB drive is currently:

\_ISO\WINDOWS\INSTALLS
      \APPS - contains installers and scripts to execute them
      \DRIVERS\904HA\WIN1032 - contains scripts and special drivers to copy to HDD
      \SNAPPY    - contains the SDI files
      \CONFIGS - contains main .cmd file specified in RunOnce portion of XML file

Add post-install files to a Windows Install (using an unaltered MS ISO)

I have added a bottom section to my previous blog here, detailing how you can inject files and folders automatically into a Windows Install (7/8/10) by using an entry in an XML file. The .iso file is not modified at all. All files are copied from the E2B USB drive.

This means that as well as a fully automated install using an unattend.xml file, we can also cause it to transfer over any files we like (e.g. drivers, apps, registry tweaks, etc.) from the E2B Removable USB drive, without needing to modify the original MS ISO in any way.

It also allows us to add in a \Windows\Setup\Scripts\SetupComplete.cmd file, if required and even run a StartUp.cmd file for first user logon.

The next version of E2B will include a test sample XML file (\_ISO\WINDOWS\WIN10\Auto_WipeDisk0_Win10ProUK_setupcomplete_demo.xml), with some dummy .cmd files which happen to be in \_ISO\e2b\firadisk, so you can test and modify it for yourself if you wish.

This means you can use the same ISO to install different models of PCs with different drivers and applications just be selecting the correct XML file. Your E2B drive can contain folders for machine-specific drivers and different folders for applications, so that you can copy over only those folders that you need.

Of course, how you install the drivers and apps from a cmd file is usually the tricky part, but I leave this up to you!

Add Gentoo + Persistence to E2B

Here is how to boot from a Gentoo ISO file with persistence.

I used the livedvd-x86-amd64-32ul-20140826_gentoo.iso download.

The cheat code needed is in the form aufs=/dev/sdX3  where X is the USB drive.

Since the USB drive number will vary from system to system, we have to try to guess what Gentoo will assign the USB drive as!

Instructions

Bug in E2B v1.81 - Please update to v1.81A (bugfix in MAKE_E2B_USB_DRIVE (run as admin).cmd script)

A bug was reported in the v1.81 MAKE_E2B_USB_DRIVE (run as admin).cmd script which causes it to prematurely abort if  C:\bootmgr is not found. After copying over the files, the script checks the size of bootmgr and then copies it to the E2B drive if it is a compatible version - unfortunately if C:\bootmgr does not exist then the script just aborts, and so it does not install grub4dos, leaving you with an unbootable E2B USB drive ('bootmgr is missing' error).

This is now fixed in E2B v1.81A.

The E2B menu will still display "v1.81" because only the make script is affected.

Easy2Boot v1.81 is now released

QR code contains the URL of 'List of tested payload' page on E2B website.

Version 1.81 contains 3 bugfixes (in bold) and a few tweaks...

As always, just download and extract E2B to an empty folder and run the \UPDATE_E2B_DRIVE.cmd file to update all your E2B drives.


v1.81 2016-07-09

• New grub4dos \grld 0.4.6a 2016-07-04 (grub4dos USB driver may now work better?)
• $$AddWin2Main.mnu bugfixes for direct booting of Windows Install ISOs from Main menu. 
• Bugfix for .isope path problems and + make work if iso on 2nd partition (note: .isoPExxx extensions only work correctly on Removable Flash drives, otherwise convert to .imgPTN files). 
• SWITCH_E2B.exe v1.0.12 bugfix for syslinux booting (also supports .imgptn*2* as well as .imgptn*23* extension for special users - .imgptn*2* is NOT supported by E2B though!).

Which USB 3.0 SATA disk drive enclosure is best for E2B (six enclosure shoot-out)?

USB 3.0 controllers are designed to operate at fast speeds, so it makes sense to buy a USB 3.0 drive enclosure, even if you are going to connect it to a USB 2.0 port. Because I do a lot of work with USB drives, I mostly use a USB 3.0 drive caddy containing an SSD hard disk for maximum speed. I also use a UASP HDD enclosure to get the best possible speed with an SSD drive under Windows.

However, for booting a wide range of systems with E2B, a UASP HDD drive may not be the most compatible option...

Creating fully unattended XML answer files for Windows 10 Install ISOs for E2B

I detailed in a previous blog here, how to create and modify an XML file to fully automate the installation of Windows 7 and 8.

The process is identical for Windows 10. You need to specify a Product Key in the XML file (same as Win8), although not all ISOs may need it (e.g. some MSDN or Volume Licence ISOs).

The process is:

Adding 'multiboot' WinPE ISOs (such as GeekSquad MRI_5_10_2.ISO) to E2B

If you have an ISO file which contains bootmgr and boots to WinPE, then you can use it with E2B by renaming the file extension to .isoPE or .isoPE01. This only works if you have a Removable E2B USB drive (you should convert the ISO file to a .imgPTN file if your E2B USB drive is of the 'fixed disk' type).

Note: There was a bug in previous E2B versions when using .isoPE and .isoPE01 file extensions (the blue LOADISOPE.cmd console window stopped with an error and the ISO was not loaded). You will need a recent version - e.g.  E2B v1.81 Beta from the Alternate Download Areas (see side bar).

However, if you use the .isoPE file extension, it will cause E2B to immediately load and run bootmgr and so the ISO will boot straight to WinPE and you won't see the non-Windows boot menu, if one was present inside the ISO.

Make a basic Easy2Boot MyE2B.cfg configuration file.

If you already have an E2B USB drive, you can easily update it by downloading the latest version of E2B and then run the UPDATE_E2B_DRIVE.cmd script.

Newer versions of E2B have a new version of the MAKE_E2B_USB_DRIVE (run as admin).cmd script, so that when you make a new E2B USB drive, it also asks you some questions about how you want to configure E2B - e.g. language, keyboard, if you want the file extension to be displayed in the menus and if you want the rotating E2B logo to be displayed (with Boiler Plate or QR code).

If you have already made your E2B USB drive, you can run the same script to create a new \_ISO\MyE2B.cfg file by running the \_ISO\docs\Make_E2B_USB_Drive\Make_MyE2B.cfg.cmd script. It will ask you to select a USB drive and then will run through the same questions that MAKE_E2B_USB_DRIVE (run as admin).cmd asks.