Add a Debian Live ISO with persistence to Easy2Boot

You can download the latest Debian Live ISOs from here.

I used debian-live-8.1.0-amd64-mate-desktop.iso and added persistence by using a .mnu file.

The new .mnu file will be added to the E2B v1.72 Sample mnu files folder , but can be downloaded from the Alternate Download (Google Drive and One Drive) areas (look under 'mnu files').
OneDrive download area
Google Drive download area

The .mnu file should work for most Debian Live ISOs if you change the name of the ISO inside the .mnu file (occurs twice).

Clean install of Windows 10 without needing to first do an Upgrade install

I found the instructions on ghacks.net today.

Note: In later versions of Win10, these instructions are not required. Just install a fresh copy of Win10 and enter the original Win7/8 product key and it should activate!

You can also just boot from a USB drive to WindowsToGo and pre-activate any system for Windows 10 - see here.

I have not tried it but it looks useful!

Quote from ghacks.net shown below in case it disappears.

Tip: Before you run this operation, make sure to backup the existing Windows installation so that you can restore it should things go wrong.

Here is what you need to do to clean install Windows 10 on a computer system, without needing to run the Win10 Upgrade first and then wipe and re-install.

1. You need a Windows 10 DVD or ISO image. If you don't have one get it from here. Download the tool from Microsoft's website to create the ISO image. Make sure you pick the right architecture and version.
2. Burn the ISO, mount it or extract it.
3. Navigate to the folder \Windows\x64\sources or \Windows\x32\sources and drag&drop the file gatherosstate.exe to the desktop.
4. Run the file from the Desktop. It creates GenuineTicket.xml on the desktop. This file is needed, so copy it to a USB drive or other location.
5. Run a clean install of Windows 10 afterwards on the system using the ISO. Make sure you skip the product key.
6. Once you are done and in Windows 10, copy the file GenuineTicket.xml to C:\ProgramData\Microsoft\Windows\ClipSVC\GenuineTicket. The folder is hidden by default. If you cannot see it, select File > Options > View > Show hidden files, folders and drives in File Explorer.
7. Reboot the PC.

The next time you boot into Windows 10 it should be fully activated. You can verify that easily with a tap on Windows-Pause. This opens the System Control panel and the system's activation status at the bottom of the page.

Tip: Copy the gatherosstate.exe file to your E2B USB drive and add these instructions into a .txt file on the E2B USB drive. Then you can use this process on any Win7/8 system.

Easy2Boot v1.72BetaL2 available

This version checks the version of bootmgr when you boot from a VHD file to check it is not the Windows 10 version + a new grldr grub4dos version.

It also has a new E2B default background wallpaper which should load a lot faster than the old one. Let me know if you like it by ticking the 'funny' reactions checkbox, as it is rather different from previous E2B wallpapers (or tick 'Interesting' if you prefer the old wallpaper)!

Alternate Download Areas:
OneDrive download area      Google Drive download area

Easy2Boot and VHD BSOD 0xc00000bb boot problem

I have just found that the Windows 10 version of bootmgr is incompatible with NTBOOT for directly booting VHD files in Easy2Boot.

I have posted the problem on reboot.pro here.

If you have used a Windows 10 system to make an Easy2Boot USB drive, you may find that the version of bootmgr will give a BSOD 0xc00000bb error if you try to directly boot from a VHD.

To fix this, replace the version of bootmgr in the folder \_ISO\e2b\grub\DPMS\NTBOOT.MOD with an older version.

Older versions 2, 3 and 4 all work OK,

1. bootmgr 10-07-2015 395268 CRC32=45B6D6D7   - WINDOWS 10 version  INCOMPATIBLE!

2. bootmgr 22-08-2013 427680 CRC32=87783488

3. bootmgr 25-07-2012 398156 CRC32=4B1A74EF

4. bootmgr 14-06-2014 404250 CRC32=CB810D1B

Windows Answer File Generator site now has Windows 10 support

I just noticed that the WAFG site now has a Windows 10 page, so you can generate your own Windows 10 Unattend.xml answer files (and then use XMLtoE2B.exe to convert them for use with E2B).

Don't forget to say thanks by donating to the WAFG site if you find it useful!

Add a global hotkey to Easy2Boot

You can define global hotkeys to do various things by adding hotkey commands to the \_ISO\MyE2B.cfg file. Some examples are given in the \_ISO\Sample_MyE2B.cfg file.

Do you have a favourite ISO file that you always like to boot to in Easy2Boot?
Why not set up a global hotkey for it so you can boot to it from any E2B menu?
What about booting Hirens or WindowsToGo or WinPE, using a hotkey from any menu?

For instance, set up the F11 hotkey to always run an Ubuntu Live ISO (or any ISO file) from any menu, by adding the line below to your \_ISO\MyE2B.cfg file:

(bd)/%grub%/hotkey [F11] "(bd)/%grub%/qrun.g4b force.isodefault  (bd)/_ISO/MyUbuntu.iso ;; boot" > nul

Follow my blog with Bloglovin

Why you should always check for download file corruption!

It is not uncommon to download a large file only to find that it is corrupt. Sometimes the problem is immediately obvious, but sometimes it can leave you scratching your head for hours, before you finally realise that your source file was corrupt!

It is also not uncommon to find that when a large file is copied to a USB drive, the copy did not work correctly and leaves you with a corrupt file. 'Fake' USB drives can also cause this type of symptom.

Downloading a Zip/7Zip/Rar compressed file is usually safe because when you unzip it, you will be warned if it is corrupt, but if you download a .ISO file you should always double-check it!

For instance, I have found file corruption in a large \sources\install.wim caused a problem with Windows failing to boot after a fresh install, but Setup did not complain that the install.wim was corrupt!

MPI Tool Kit v0.054 available (BitDefender/grub2 bugfix)

Due to a weird issue with one of the files on my system, whenever I used the MPI Tool Kit to convert the BitDefender Rescue CD ISO to a .imgPTN file, it always worked (for me!). However, as no one else would have this 'undeletable' file on their system, it turns out that converting a BitDefender ISO (and probably many other grub2 ISOs) to a .imgPTN file probably did not work for anyone else!

I compared a working .imgPTN file with a non-working one and the problem turned out to be due to the \boot\grub\i386-pc\command.lst file being a binary file (despite having a .lst file extension!), but it was getting corrupted by MPI because it was processed as a text file!

MPI changes some strings (e.g. UUID and volume label, etc.) in some text files, using ssed.exe (a version of sed) .

To fix the problem, I needed to find out if each *.lst file was a text file or a binary file and ignore any binary files.

This proved to be quite tricky as Windows does not seem to have a way to detect if a file is a binary file or not (that I could find).

In the end, I used ssed.exe to find and replace any 00 hex bytes in the file with the characters "ZZXXZZ" and then used the Windows find.exe utility to see if any substitution had taken place.

::check for binary file
ssed   "s/\x0/ZZXXZZ/g" "%~1" > sed1.txt
find "ZZXXZZ" sed1.txt > nul
if not errorlevel 1  echo %~nx1 IS A BINARY FILE && goto :quit

Not elegant, but it works!

If you are having trouble getting BitDefender or other grub2 ISOs to work as .imgPTN files, please download the MPI Tool Kit v 0.054 and then run the CreateDesktopShortcuts.cmd script to update your shortcuts to point to the new version.

This version also has improved MBR recovery in case you accidentally trash your E2B drive (for example by accidentally installing grub2 to the MBR and the following sectors). A backup copy of the MBR is now made to the file \e2b\MBR.BIN as soon as you boot to the CSM menu. Once you restore the MBR from this file (by using BootIce or RMPrepUSB - File->Drive), you can re-install grub4dos to the MBR using RMPrepUSB and your E2B USB drive should be operational once again.

Add a full Kali (or multiple linux) installations to your Easy2Boot USB drive using Virtual Box

It is possible to create multiple fully-installed linux installations on a single E2B USB drive by creating image partition files (.imgPTN files).

We can do this by making fake 'blank' partitions on our E2B USb drive (.imgPTNfile) and then using Virtual Box with DavidV's VMUB utility to install linux onto it.

Use the latest MPI Tool Pack (v.0.054 2015-08-21 or later). This includes CSM menu support for grub2/syslinux installations on the 3rd partition.